Mach 3 conversion to Stepconf Wizard

Will you convert mine too? Thanks!

-Cole

Will be extremely grateful if you can convert this one for me please. I don't know where I was going wrong the last time I tried, but just couldn't get it to work.

Hi BigJohnT, Could you please convert my file also? (Maybe you forgot to do it before xD). If you can't, then thanks anyways, but please tell me to format that partition and use it for something else..

It's a Syil x7 plus from the year 2014 with 4 axis, XYZA. (Just adding the model and year just in case someone has the same machine and also wants the file).

The Mach3 configuration is in metric by the way.

Thanks a lot!

Hi John, could you help convering the MX4660 Mach 3 file for me.
Thanks a lot.
palmfans

Hi there BigJohnT

Would appreciate the conversion of my Mach3 settings, I have included the 2 I use in the zip, the main and mostly used one is the metric one (Mach3 doesn't play nicely just using G20/G21)

Cheers
Bruce

Hi. Cuold I send you my xml file? Thanks a lot.

Hello John,

Please could you convert a Mach 3 Denford Easiturn config for me.

Thanks,
Edward

Hi!

Would you like to make conversion for me?

hank you,

Daniel

golem wrote: Hi!

Would you like to make conversion for me?

hank you,

Daniel

By any chance are you using the yet to be released 2.7 version? My conversion program is now part of the Stepconf Wizard thanks to Chris.

JT

Thank you for answer.
I made fresh installation of 2.7 version.
I started Stepconf and there wasn't option to import mach fconfiguration...
I would be grateful for making me a conversion.