Touch Screen Recommendations

More
9 years 5 months ago #93728 by tommylight
www.ucuzsarf.com/image/data/resimler/hdm...rici-aparat-6001.jpg
I got that ! It can be used as an output from the graphic card DVI to TV HDMI ! Nothing else. I need the other way round.
So you are right, thank you for the tip.

Please Log in to join the conversation.

More
8 years 1 month ago #117646 by racedirector
Late into this I know but I just installed a Planar PCT2235 and it just works. Using for Pathpilot at the moment. No calibration, USB "powered" but it is cool!

Cheers

Please Log in to join the conversation.

More
7 years 7 months ago #127930 by Ivan_The_Red
Just tried an HP E230T and it worked fine, no calibration required, but only single touch. I also needed to issue the SUDO MODPROBE HID_MULTITOUCH command before it would work. Im currently using the Debian Wheezy version of Linuxcnc.

Please Log in to join the conversation.

Time to create page: 0.037 seconds
Powered by Kunena Forum