LinuxCNC + Orange Pi (allwincnc)

git clone https://github.com/allwincnc/installer cd installer ./install_kernel.sh sudo reboot # or shutdown now ./install_fw.sh sudo reboot # or shutdown now ./install_sys_tweaks.sh sudo reboot # or shutdown now ./install_linuxcnc.sh sudo reboot # or shutdown now ./install_drv.sh sudo reboot # or shutdown now ./install_cfg.sh sudo reboot # or shutdown now

Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 45000000 1275 bytes read in 3 ms (415 KiB/s) Applying user provided fixup script (fixup.scr) ## Executing script at 45000000 Found the ARISC firmware blob `/boot/arisc-fw.code` Base Address: 0x00000000 asserting the ARISC core reset.. asserting reset done, trying to upload the blob to the SRAM A2 (0x00040000).. 21628 bytes read in 3 ms (6.9 MiB/s) uploading done, de-asserting the ARISC core reset.. de-asserting reset done, the ARISC core is ON. ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 14645706 Bytes = 14 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... Bad Data CRC Ramdisk image is corrupt or invalid SCRIPT FAILED: continuing... 7[r[999;999H[6n8Scanning disk mmc@1c0f000.blk... Card did not respond to voltage select! : -110 Scanning disk mmc@1c10000.blk... Disk mmc@1c10000.blk not ready Scanning disk mmc@1c11000.blk... ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** ** Unrecognized filesystem type ** Found 18 disks No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3967 bytes read in 3 ms (1.3 MiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 202 bytes read in 2 ms (98.6 KiB/s) 14645770 bytes read in 607 ms (23 MiB/s) 8090200 bytes read in 337 ms (22.9 MiB/s) Found mainline kernel configuration 33211 bytes read in 6 ms (5.3 MiB/s) 4185 bytes read in 6 ms (680.7 KiB/s) Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 45000000 1275 bytes read in 2 ms (622.1 KiB/s) Applying user provided fixup script (fixup.scr) ## Executing script at 45000000 Found the ARISC firmware blob `/boot/arisc-fw.code` Base Address: 0x00000000 asserting the ARISC core reset.. asserting reset done, trying to upload the blob to the SRAM A2 (0x00040000).. 21628 bytes read in 3 ms (6.9 MiB/s) uploading done, de-asserting the ARISC core reset.. de-asserting reset done, the ARISC core is ON. ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 14645706 Bytes = 14 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... Bad Data CRC Ramdisk image is corrupt or invalid SCRIPT FAILED: continuing... BootOrder not defined EFI boot manager: Cannot load any image Device 0: unknown device ethernet@1c30000 Waiting for PHY auto negotiation to complete........ done BOOTP broadcast 1