LinuxCNC + Orange Pi (allwincnc)

More
5 years 3 months ago #213743 by envyvan
Replied by envyvan on topic LinuxCNC + Orange Pi (allwincnc)
Therefor, I should still use the "net" to sign up the pin number which is connect to the output function. like the DIR/STEP or etc..

Please Log in to join the conversation.

More
5 years 3 months ago #213852 by envyvan
Replied by envyvan on topic LinuxCNC + Orange Pi (allwincnc)
I have play around the system few time, When I runing the NC program and open some other windows like LinuxCnc Status to watch the parameter and setting, It will shows up "Joint 1 following error."

Please Log in to join the conversation.

More
5 years 3 months ago #213872 by Bari
Replied by Bari on topic LinuxCNC + Orange Pi (allwincnc)
wiki.linuxcnc.org/cgi-bin/wiki.pl?Following_Error

forum.linuxcnc.org/38-general-linuxcnc-q...or-on-stepper-system

Please Log in to join the conversation.

More
5 years 3 months ago #215339 by Dolence
Replied by Dolence on topic LinuxCNC + Orange Pi (allwincnc)
Hi! What's the status of this project on H5? Is it usable? I'm having problem with my PC motherboard and latency spikes. Is it usable at the actual stage?

Please Log in to join the conversation.

More
5 years 3 months ago #215356 by Bari
Replied by Bari on topic LinuxCNC + Orange Pi (allwincnc)
Which H5 board do you have? It's currently difficult to get any H3/H5/H6 or A64 hardware.

I just spotted these on Amazon with 2GB of RAM for only $40:   www.amazon.com/Libre-Computer-Board-ALL-...ritium/dp/B07D4KTRWR

Please Log in to join the conversation.

More
5 years 3 months ago #215429 by Dolence
Replied by Dolence on topic LinuxCNC + Orange Pi (allwincnc)
Orange Pi Prime. They are avaliable where I live. They can be used on real world hardware?

Please Log in to join the conversation.

More
5 years 3 months ago #215504 by Bari
Replied by Bari on topic LinuxCNC + Orange Pi (allwincnc)
This is all still in Beta.

Please Log in to join the conversation.

More
5 years 3 months ago #215513 by Dolence
Replied by Dolence on topic LinuxCNC + Orange Pi (allwincnc)
I purchased one of these H5. Wanna try it on real hardware CNC. By usable I mean... It loses steps, or have any serious bug that would prevent for being used? I'm avid to use it! I've been searching for an example of it working on a real machine but haven't found anything. 

Thanks for this awesome work! I

Please Log in to join the conversation.

More
5 years 3 months ago #215633 by Bari
Replied by Bari on topic LinuxCNC + Orange Pi (allwincnc)
The last post specifically about the H5 forum.linuxcnc.org/18-computer/39037-lin...cnc?start=150#208831

I only have an older 512MB H3 board.

Please Log in to join the conversation.

More
5 years 3 months ago #215646 by Dolence
Replied by Dolence on topic LinuxCNC + Orange Pi (allwincnc)
So, I guess no ARISC support in H5 at this moment. I should've picked an H3 but thought 512 MB RAM would be too low to run x server and axis. Anyway, I would be glad in doing tests and reporting back. If needed, count on me. I have a fully assembled machine to this.

Please Log in to join the conversation.

Time to create page: 0.185 seconds
Powered by Kunena Forum