Manual Tool Change again?

andypugh wrote: Try an IF around the remap moves:
O100 IF [#<_task> EQ 1]
...
O100 ENDIF
www.linuxcnc.org/docs/html/gcode/overview.html#sec:parameters

I'v checked it on sim machine, and it works. THX Will check on my real one.

Hi.
I have wondering why my tool change probe and scripts, somethimes crash my machine.
I was blind (noob also) and didnt recognise this command: G43 Z15. H0 :blush:
Its in every my GCode file, after load new one and run it, it reset my tool Z offset, and calculations to next being reset.

Im using HSM Express post processor, there i should search for answer (modify)?
Anyone had same problems?

Edit: I made changes in postprocesor. It seems like its not ready to handle manual tool change, strange.