Axis Modifications

Thank you for the fast answer. I'll try it once

Shouldn't be thought about.
A component that is now so important as the spindle angle not to be entered as an absolute value 0-360° in the HAL component spindle.0.....? Currently I've entered it with me like this see screenshot.
 

For this mod, the value of the position is equal to any float point number(and negative), where 1.0 = 360°.
Displayed only part of number after a decimal point, for example, input value = 123.4, displayed 90.0°(0.4).

Yes, I know that, that's why the arithmetic.
I have currently solved it with my own spindelpos.comp component. Can live with that at the moment.

If you only need to display the angle value, without any processing, replace in glcanon.py:

Many Thanks. We'll see when I get to it 3 children there's always something going on.

radom wrote:

Ok now I get it, you cannot have offsets showing with this mod
 

Fixed:

LinuxCNC 2.8.4 with Axis mod and Mesa driver from 2.9:
github.com/ddotldot/linuxcnc/tree/2.8-ax...-updated-mesa-driver

Here is a snippet to add G-code progress & remaining time estimate to the Axis status bar:
github.com/HacklabJKL/sergei_cnc2/commit...7983c7956d92219af00f



Like the estimate in File -> Properties this does not take acceleration into account, so it will typically estimate a bit shorter time and run negative at the end of the G-code. It does take into account the current feedrate overrides, and updates in real time even if they are changed in the middle of the job.

Nice Feature