Opening PlasmaC Axis Config in Maximised Form

More
7 years 1 month ago #144106 by phillc54
Replied by phillc54 on topic Opening PlasmaC Axis Config in Maximised Form
Yeah, I didn't think so, just grasping at straws. I am installing a new virtual machine to see if I can duplicate your issue.

Please Log in to join the conversation.

More
7 years 1 month ago #144117 by phillc54
Replied by phillc54 on topic Opening PlasmaC Axis Config in Maximised Form
Well, If it is any consolation it behaves exactly the same on this new installation of LMDE3.

I will have a poke around.

Please Log in to join the conversation.

  • thefabricator03
  • Topic Author
  • New Member
  • New Member
More
7 years 1 month ago #144118 by thefabricator03
Replied by thefabricator03 on topic Opening PlasmaC Axis Config in Maximised Form
I guess thats good news.. At least its a repeatable problem.

Please Log in to join the conversation.

More
7 years 1 month ago #144134 by phillc54
Replied by phillc54 on topic Opening PlasmaC Axis Config in Maximised Form
It is something to do with the Cinnamon desktop but I don't know what.

I installed the mate-desktop-environment, logged out, logged in and Axis now appears as it should.

Please Log in to join the conversation.

  • thefabricator03
  • Topic Author
  • New Member
  • New Member
More
7 years 1 month ago #144135 by thefabricator03
Replied by thefabricator03 on topic Opening PlasmaC Axis Config in Maximised Form
What is the easiest way to install the mate desktop environment?

Please Log in to join the conversation.

More
7 years 1 month ago #144136 by phillc54
Replied by phillc54 on topic Opening PlasmaC Axis Config in Maximised Form
Go to Administration - Synaptic Package Manager then search for mate-desktop-environment

Please Log in to join the conversation.

  • thefabricator03
  • Topic Author
  • New Member
  • New Member
More
7 years 1 month ago #144137 by thefabricator03
Replied by thefabricator03 on topic Opening PlasmaC Axis Config in Maximised Form
Ill give it a go tomorrow and Ill let you know.

Please Log in to join the conversation.

More
7 years 1 month ago #144138 by phillc54
Replied by phillc54 on topic Opening PlasmaC Axis Config in Maximised Form
No worries.

After installing it and logging out it will show a login window. To the right of your name there is an icon, click on that and select the Mate desktop then login. It should remember next time.

You will need to set everything up how you like as it will start with their defaults.

Please Log in to join the conversation.

More
6 years 8 months ago #157123 by phillc54
Replied by phillc54 on topic Opening PlasmaC Axis Config in Maximised Form
This issue is now fixed in LinuxCNC 2.9 (master branch).

github.com/LinuxCNC/linuxcnc/pull/679

Please Log in to join the conversation.

Time to create page: 0.049 seconds
Powered by Kunena Forum