Huanyang vfd Plug-in

LucaPlotter wrote: My spindle is called " spindle- vfd.spindle -forward "

But I keep getting that error when I start my configuration !

If you get _that_ error message, then it may be that you are not editing the right file.

The error message says that you are trying to connect to a HAL pin called "spindle-vfd.spindle-fwd"

Are you sure that the error message hasn't changed?

I'm sorry I have been away because I had other problems with the pc .... short try again to set all that you told me , and you upgrade .... we hope that this time functions !

I tried to re-edit my custom.hal continues to give me back error ,
./custom.hal:6 : waitpid failed ht_vfd spindle- vfd
./custom.hal:6 : hy_vfd exited without becoming ready

more I can not access my tty !!!

I am not sure that you would expect to be able to do anything simply by typing /dev/tty

ls /dev/tty*

Should list the devices.

If you are running from a USB or DVD then you probably won't have the required access to the tty.

Hello Luca,

I am using the build in Huanyang component to interface with my Huanyang VFD through a rs232 to modbus converter.

I am handicapped with Linux, so I cant help you any further than to let you have a look at what works for me (attached).

Hope this helps.

I have made a custom gladevcp panel for huanyang vfd.



Just put these files to your config folder
edit custom.hal this line and put these settings to your vfd.

Also edit your machine ini file and add these lines in [DISPLAY] section
Your [HAL] section in you machine ini file must have
last add your user to dialout group (to allow access usb_to_rs485 for your user account)
from terminal give the command

I must really thank everyone, though .... I have done everything to the letter in detail what you have suggested , but continues to give me errors , below its place text files for the first congigurazione who proposed me " pommen ( TEST_1 ) " and for the second configuration that I proposed " vre ( test_2 ) "

I do not understand much , but I really can not understand what can be !!!! Space would indeed if I were I could !!!

Thanks very much to all !

How have generated your config ?
If you generated the config with stepconf wizard you must NOT select any spindle at stepconf dialog.

Yes, I opened again the tools " Stepconf Wizard" and I chose the modification of existing configuration with modified custom.hal , but nothing ! more usual error

upload your config