[ Vfdmod ] An easy VFD control over MODBUS RTU

 
It looks lilke aekhv has pulled the project There are are forks of it, but forking doesn't capture the wiki or the project or the releases. I'll attach the debian 3.2 release in case you still want to use it..

Thanks man, sorry about the frustration.....

Someone got the Vfdmod package for RaspberryPi? (arm)

So is it possible to get hold of VFDMOD? I installed this on a previous setup and it was ideal for me. Now I just get 404 error wherever I look!

Hi,

I managed to get VFDMod to run using the good ol' Wayback machine. A bit slow but everything available (even the installable download package mentioned above).
web.archive.org/web/20230123060705/https...ub.com/aekhv/vfdmod/

 My BD600 Spindle is running (when pushing the button) and I can also issue the GCode Command to change the spindle speed but I can not change the speed using any button. Nor Do I see the speed or Spindle Load. Did anyone get VFDMod Working in QTPYVCP?

This might help - github.com/thestealth131205/vfdmod

I've been having issues with MB2HAL and an L510 VFD rebrand. I was hoping to try VFDMOD but unfortunately, the ARM DEB package is armhf and I am using an Rpi 5.Early days for my linuxCNC'ing, but....Is it possible to repackage for arm64 from 32bit?Also thought I'd attach the wiki here just in case. 

For the benefit of anyone else using the L510 (or the RS-branded RS510) VFD this component seems to work:
github.com/gitcoffey/l510_vfd
after making this change
github.com/gitcoffey/l510_vfd/pull/1
Install with

Hello!
Can anybody help me out with this step by step? (I'm not a Linux user)
I have my old setup, but i don't remember how to add Vfdmod to the LCNC, to see the pins and other.
I have now a Buster system with LCNC 2.9.7 and have a "not found file/directory Vfdmod" message.
All old links not works... How to compile it and from where and which file I have no clue...

Unfortunately Vfdmod is no longer maintained and isn't really a good option for new installs. It was a bit of a pain but I switched to mb2hal. Between the documentation and a few examples I was able to figure it out with some trial and error. I suggest switching to that.