Huyndai hit 15s retrofit

  Got the new to me motherboard going, need to do a fdw things to trick it a lil did a test but didnt have a chance to get the file but i took a pic Any settings in bios i need to turn off? I turned off hyperthread  

Looks ok so far, test with
latency-histogram --nobase --sbinsize 1000 --show
If you do not need software stepping/parallel port, and watch youtube and copy some files around while that is running.

Will do that this weekend, been busy doing other things. Plenty of work to do lol

Stop worrying, start making chips. Or at least running wires.

Believe me buddy im not worried, tring to juggle everything at once thats all. Got to allocate time here and there, im getting the panel squared away so i dont drop to monitor lol

That looks like a really nice lathe. How far will you need to strip down the mechanical bits? How is the wear? Look forward to seeing under it's skirt.

Its not a bad looking lathe, from what i can tell it cut mostly plastic and a lil aluminum. The guy i got it from said they changed the z ball screw but he also told me that if i powered it up i can see the alarms, but he was full of shit lol. He was pretty dishonest lol but what can i expect i bought it at a auction sight unseen.

I still need to get a chuck but i wanna wait til i get it moving before i do, im picking up a 3phase generator next week so i may be able to move the axis with a small battery mabe

Might be worth looking at whether it can run off single phase. The servo drives convert to DC internally (and then back to AC) so they don't care.

It might take a bit of analysis to work out what the input stages are, but you might find a separate 3-phase input transformer and rectifier stage that will just work happily on single phase.

That would be great if it would work but im not sure how to even figure it out, heres some pics of the transformer, goes from 220 3p in to 400v 3p out 

More