7i77 5i25 hm2_pci unloaded

bkt
Topic Author
Offline
Platinum Member

9 years 11 months ago #83267 by bkt

Replied by bkt on topic 7i77 5i25 hm2_pci unloaded

PCW wrote: I have installed both, it depends on the Ubuntu 14.04 version
As I said before, Ubuntu 14.04 is available in both 32 and 64 bit versions
when you build a kernel, it needs to match your OS

You can check if your OS is 32 or 64 bit by clicking "System-Settings" and then "Details"

sorry not see your .. but I my system today is 64bit (today install) ... so i select 64bit.
Is ok for lcnc mesa 7i77 and 5 analog + encoder rotary deltrobot control??

At these moment I'm over xconfig of kernel 4.1.5 ....

any how other option in xconfig??

Regards
Giorgio

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

9 years 11 months ago #83268 by bkt

Replied by bkt on topic 7i77 5i25 hm2_pci unloaded

in the processor feature:
Use register argument??
local APIC options?

Kernel Hacking -
Compile the kernel with frame pointers options??

others??

Regards
Giorgio

Please Log in to join the conversation.

PCW
Offline
Platinum Member

9 years 11 months ago #83274 by PCW

Replied by PCW on topic 7i77 5i25 hm2_pci unloaded

Other than the 2 options I mentioned I would not worry about any others for now

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

9 years 11 months ago #83280 by bkt

Replied by bkt on topic 7i77 5i25 hm2_pci unloaded

Linux k1 4.1.5-rt5 #1 SMP PREEMPT RT Fri Nov 25 15:17:29 CET 2016 x86_64 x86_64 x86_64 GNU/Linux

the uname -a response...

now try git master....

regards
Giorgio

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

9 years 11 months ago #83282 by bkt

Replied by bkt on topic 7i77 5i25 hm2_pci unloaded

Code:

git clone git://git.linuxcnc.org/git/linuxcnc.git linuxcnc-dev
Cloning into 'linuxcnc-dev'...
remote: Counting objects: 202402, done.
remote: Compressing objects: 100% (43930/43930), done.
remote: Total 202402 (delta 161396), reused 196478 (delta 156589)
Ricezione degli oggetti: 100% (202402/202402), 92.20 MiB | 800.00 KiB/s, done.
Risoluzione dei delta: 100% (161396/161396), done.
Checking connectivity... fatto.
k1@k1:~$ cd linuxcnc-dev
k1@k1:~/linuxcnc-dev$ git checkout master
Si è già su 'master'
Your branch is up-to-date with 'origin/master'.
k1@k1:~/linuxcnc-dev$ git pull
Already up-to-date.
k1@k1:~/linuxcnc-dev$ cd debian
k1@k1:~/linuxcnc-dev/debian$ ./configure -a
no realtime kernels found!

but

Code:

k1@k1:~$ uname -a
Linux k1 4.1.5-rt5 #1 SMP PREEMPT RT Fri Nov 25 15:17:29 CET 2016 x86_64 x86_64 x86_64 GNU/Linux

how is possible??

Regards
Giorgio

Please Log in to join the conversation.

andypugh
Offline
Administrator

9 years 11 months ago #83283 by andypugh

Replied by andypugh on topic 7i77 5i25 hm2_pci unloaded

try ./configure --with-realtime=uspace

Please Log in to join the conversation.

PCW
Offline
Platinum Member

9 years 11 months ago #83284 by PCW

Replied by PCW on topic 7i77 5i25 hm2_pci unloaded

you need
./configure --with-realtime=uspace

Please Log in to join the conversation.

PCW
Offline
Platinum Member

9 years 11 months ago #83286 by PCW

Replied by PCW on topic 7i77 5i25 hm2_pci unloaded

actually the configure option is different since you are making a deb rather than a RIP install
so I would read through this:

linuxcnc.org/docs/devel/html/code/building-linuxcnc.html

before building

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

9 years 11 months ago #83291 by bkt

Replied by bkt on topic 7i77 5i25 hm2_pci unloaded

after 1 hour all these windows open an run .... and one serial modbus active ...

better than wheezy when test it .....

now I have Lcnc master installed ..... and I must charge mesaflash bit file ...
I must download the uploaded firmware (some week ago I have ssreial error at emergency stop) .....

After these I try to compile my custom comp and my delta kins.... I hope in a good chance...

Attachment not found

Regards
Giorgio

Please Log in to join the conversation.

bkt
Topic Author
Offline
Platinum Member

9 years 11 months ago #83292 by bkt

Replied by bkt on topic 7i77 5i25 hm2_pci unloaded

oh-oh ..... I gave these message ...

Code:

Unexpected realtime delay on task 0 with period 25000
This Message will only display once per session.
Run the Latency Test and resolve before continuing.
Note: Using POSIX realtime

when start Latency Test ............

Is Really a problem?? How to solve these??

Regards
Giorgio

Please Log in to join the conversation.

Time to create page: 0.097 seconds