Mesa 7i95

PCW wrote: I also see a manual error (probably a copy/paste error from the 7I97 manual )

that's why I inserted these two images Can I ask you to fix it?

@PCW(Peter),

could you please create a Bitfile for the 7i95 with a 7i76 on P1?

Thanks!

It can only be done if you drop the stepgens on the 7I76
(of out of room) Is that OK?

That would be fine. Thanks.

freeby.mesanet.com/7i95_7i76iod.bit

Thanks Peter.

What would be the best source package for a custom 7i95 bitfile? I tried the current 7i92 / 7i80 sources but I keep getting a "Cannot find <dumbass8sqwsb> in library <work> when I try to compile even the included PIN layouts.

I could probably ask here but in the past I was able to make changes like PWMgen for StepGen in the PIN layout/ISE project file and compile a new custom bitfile.

If this should be too complicated I would need 1 PWMgen for the last StepGen on a standard 7i95.

It looks like there are a couple issues:

1. The included hostmot2sp6.vhd file is stale
2. The project file uses hostmot2.vhd but should use hostmot2sp6.vhd

To fix issue 1, download hostmot2sp6.vhd from

freeby.mesanet.com/hostmot2sp6.vhd

To fix issue 2, click on the ahostmot2 part of the source tree, right click and
select remove then right click and select add source and enter hostmot2sp6.vhd

I download and used the latest 7i80.zip sources, but I am still getting the same error message with the included hostmot2sp6 and the one I downloaded.

In the seveni95 project file, ahosthot2 was already using hostmot2sp6.vhd

ERROR:HDLCompiler:104 - "/home/ise/Downloads/7i80/configs/hostmot2/source/hostmot2/sserialwab.vhd" Line 287: Cannot find <dumbass8sqwsb> in library <work>. Please ensure that the library was compiled, and that a library and a use clause are present in the VHDL file.
ERROR:HDLCompiler:854 - "/home/ise/Downloads/7i80/configs/hostmot2/source/hostmot2/sserialwab.vhd" Line 116: Unit <behavioral> ignored due to previous errors.

Thanks for looking into this.

Looks like the zip files have not been updated

Try starting with

freeby.mesanet.com/hostmot2.zip

and doing the changes listed above

Sorry, but still no go.

Same error right after Parsing entity <sserialwab>. Cannot find <dumbass8sqwsb> in library <work>.

I also tried a 7i97 and a 7i76e bitfile and they both worked, but not the 7i95.