7i84-via-7i44-via-7i93 Mesa configuration wizard

More
6 years 1 month ago #183233 by PCW
Replied by PCW on topic 7i84-via-7i44-via-7i93 Mesa configuration wizard
OK so that's clearly the wrong firmware
Did you flash the 7I93 card with 7i93_svss4_8d.bit?

Please Log in to join the conversation.

More
6 years 1 month ago #183256 by lrak
Replied by lrak on topic 7i84-via-7i44-via-7i93 Mesa configuration wizard
Code:
$ mesaflash --addr 192.168.10.10 --device 7i93 --verify 7i93_svss4_8d.bit Checking file... OK File type: BIT file Boot sector OK Verifying EEPROM sectors starting from 0x100000... |VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV Board configuration verified successfully.

Please Log in to join the conversation.

More
6 years 1 month ago #183313 by PCW
Replied by PCW on topic 7i84-via-7i44-via-7i93 Mesa configuration wizard
Do you get the same --readhmid results if you power cycle the card now?

Edit, I rebuilt the bitfile:

Attachment not found



In case there was an issue with the bitfile in the distribution

Please Log in to join the conversation.

More
6 years 1 month ago #183326 by lrak
Replied by lrak on topic 7i84-via-7i44-via-7i93 Mesa configuration wizard
That fixed things..

I now have 7i84 lines from

halcmd show all

but not 7i29 lines - I think that makes sense?

This might help you - the archive the bad file was from had this file size and date -
6461914 2020-08-16 23:03

Please Log in to join the conversation.

Time to create page: 0.039 seconds
Powered by Kunena Forum