7i95 installing

More
5 years 11 months ago #189820 by Achim1966
Replied by Achim1966 on topic 7i95 installing
o.k. the the CR19 lights RED (on) .
Whats happens ? What mußt i do?

Please Log in to join the conversation.

More
5 years 11 months ago #189821 by PCW
Replied by PCW on topic 7i95 installing
That is expected if linuxcnc was running and has exited (it indicates a watchdog bite)

Please Log in to join the conversation.

More
5 years 11 months ago #189822 by Achim1966
Replied by Achim1966 on topic 7i95 installing
thats menas i need to use an Not-Halt as an inport PIN conecteted?

Please Log in to join the conversation.

More
5 years 11 months ago #189824 by PCW
Replied by PCW on topic 7i95 installing
Not sure what you are asking, its normal for CR19 to be illuminated
when you exit LinuxCNC. (It should be off when LinuxCNC is running)

Please Log in to join the conversation.

More
5 years 11 months ago #189827 by Achim1966
Replied by Achim1966 on topic 7i95 installing
take a look

Attachment not found

Attachment not found

t the screenshot

Please Log in to join the conversation.

More
5 years 11 months ago #189829 by PCW
Replied by PCW on topic 7i95 installing
The servo thread period should be left at its default 1000000 ns

Please Log in to join the conversation.

More
5 years 11 months ago #189830 by Achim1966
Replied by Achim1966 on topic 7i95 installing
OK . how and where can I change that? You cannot use the pncconf wizard. which crashes

Please Log in to join the conversation.

More
5 years 11 months ago #189831 by 0x2102
Replied by 0x2102 on topic 7i95 installing
In your machine.ini

[EMCMOT]
SERVO_PERIOD = 1000000

Please Log in to join the conversation.

More
5 years 11 months ago #189833 by Achim1966
Replied by Achim1966 on topic 7i95 installing
you are God

Please Log in to join the conversation.

More
5 years 11 months ago #189901 by PCW
Replied by PCW on topic 7i95 installing
I have updated the LED section of the 7I95 manual

Please Log in to join the conversation.

Time to create page: 0.120 seconds
Powered by Kunena Forum