Mesa hm2/hm2_7i96s.0: error finishing read

6.5.0-0.deb12.1-rt-amd64

I burned the trixie iso, updated, then used synaptics to install linuxcnc.  Then downloaded the rt kernel Tommy linked to earlier from the Debian site.

I've obviously done something wrong again.

EDIT - it's getting late, need to get some sleep now.  Maybe I should try the standard LCNC iso tomorrow and see how it behaves on this PC.

Ok, back in the saddle.
Quick try with MX23 both with 6.1 and 6.5 rt kernels.  No joy, still getting read finishing errors.

What's the next disto/version/kernel/NIC driver combo to try?

sudo apt install -y linux-headers-$(uname -r)
sudo apt install -y dkms
sudo apt install -y r8168-dkms

linux-headers might need to be
sudo apt install -y linux-headers-rt-$(uname -r)

I've installed Deb 12 using the ISO.  uname-a reports rt-6.1.0-13

After installing the 8168-dkms ping times have gotten horrible.

 

very odd. to remove the driver. you must do: sudo apt purge r8168-dkms

Now I'm getting errors trying to remove the driver.
 

spumco wrote:

Now I'm getting errors trying to remove the driver.

 

What command did you run? It does not show.

This is an old document I did up but the principles are still the same except use ANdy's script in the 2.9 getting linuxcnc docs to instal llinuscmc
This solved the Realtek NIC issues for a lot of guys.

docs.google.com/document/d/1jeV_4VKzVmOI...diY/edit?usp=sharing

spumco wrote:

Now I'm getting errors trying to remove the driver.

 

How and from where did you install this version?
It is an older version of Debian 12 with some issues, namely looking for raspi stuff on an AMD build!
You can fix it by searching for "raspi" and deleting all 3 files it finds, then update and upgrade as usual.