New project, litehm2: a hostmot2 port to linsn rv901t

2 years 7 months ago #295873 by Cant do this anymore bye all

Replied by Cant do this anymore bye all on topic New project, litehm2: a hostmot2 port to linsn rv901t

This may help:

github.com/sensille/litehm2/issues/3

To tell the I never played with the image, just installed the tools natively on my Linux machine.

Please Log in to join the conversation.

IlyaKw
Offline
New Member

2 years 7 months ago #295880 by IlyaKw

Replied by IlyaKw on topic New project, litehm2: a hostmot2 port to linsn rv901t

Use this command to add path for riscv folder

PATH="/opt/oss-cad-suite/bin:/opt/riscv/bin:$PATH"

Please Log in to join the conversation.

xu
Offline
Junior Member

2 years 7 months ago #295894 by xu

Replied by xu on topic New project, litehm2: a hostmot2 port to linsn rv901t

Adding PATH="/opt/oss-cad-suite/bin:/opt/riscv/bin:$PATH" still gives the same alarm. The xxx.conf file must be renamed "board.conf" before make can run. The .conf file is renamed using the file you left in configs.

Please Log in to join the conversation.

IlyaKw
Offline
New Member

2 years 7 months ago #295895 by IlyaKw

Replied by IlyaKw on topic New project, litehm2: a hostmot2 port to linsn rv901t

xu wrote:
Add PATH="/opt/oss-cad-suite/bin:/opt/riscv/bin:$PATH" still gives the same alarm. The xxx.conf file must be renamed "board.conf" before make can run.

The config file may have the name whatever you want.
In the attached file clearly noted the reason of the error:

Code:

[b]OSError: Unable to find any of the cross compilation toolchains[/b]: - riscv64-pc-linux-musl - riscv64-unknown-elf - riscv64-unknown-linux-gnu - riscv64-elf - riscv64-linux - riscv64-linux-gnu - riscv-sifive-elf - riscv64-none-elf - riscv32-unknown-elf - riscv32-unknown-linux-gnu - riscv32-elf - riscv-none-embed - riscv-none-elf

Please Log in to join the conversation.

xu
Offline
Junior Member

2 years 7 months ago #295901 by xu

Replied by xu on topic New project, litehm2: a hostmot2 port to linsn rv901t

Thank you. Because the virtual machine cannot access the Internet due to the network card, the Risc-v toolchain cannot be installed.

Please Log in to join the conversation.

IlyaKw
Offline
New Member

2 years 7 months ago #295902 by IlyaKw

Replied by IlyaKw on topic New project, litehm2: a hostmot2 port to linsn rv901t

xu wrote:
Thank you. Because the virtual machine cannot access the Internet due to the network card, the Risc-v toolchain cannot be installed.

It is already installed in /opt/riscv. The $PATH doesn't contain the path to it.

Please Log in to join the conversation.

xu
Offline
Junior Member

2 years 7 months ago #295906 by xu

Replied by xu on topic New project, litehm2: a hostmot2 port to linsn rv901t

Okay, sir, this is too difficult for me. I used the conf file you wrote and changed it to see if you can help me generate a .bin .bit file. Sorry, I am using a translation software and my expression may not be accurate. Thank you, sir

Please Log in to join the conversation.

IlyaKw
Offline
New Member

2 years 7 months ago #295907 by IlyaKw

Replied by IlyaKw on topic New project, litehm2: a hostmot2 port to linsn rv901t

xu wrote:
Okay, sir, this is too difficult for me. I used the conf file you wrote and changed it to see if you can help me generate a .bin .bit file. Sorry, I am using a translation software and my expression may not be accurate. Thank you, sir

Please find attached .bit file based on this config

Attachment not found

Please Log in to join the conversation.

xu
Offline
Junior Member

2 years 7 months ago #295930 by xu

Replied by xu on topic New project, litehm2: a hostmot2 port to linsn rv901t

Thank you, sir

Please Log in to join the conversation.

xu
Offline
Junior Member

2 years 7 months ago #296022 by xu

Replied by xu on topic New project, litehm2: a hostmot2 port to linsn rv901t

gentlemen . bit file still cannot be generated

Please Log in to join the conversation.

Time to create page: 0.200 seconds