New project, litehm2: a hostmot2 port to linsn rv901t

Hi Senssille, I wanted to try the bit file from your github.com  (branch 75a-75b) but openfpgaloader gived me an error message (wrong file, missing preamble),I have the 75a-75b board, do you have another working image? 

No, that is a development branch only. I made some progress, but it is not ready yet.

IlyaKw post=274782 userid=20743
To be able to "compile" gateware for this project I have made virtual machine based on Debian 9. The image contains everything you need to do this.

I would like to support this project so I want to share this with those who are interested. The image weighs ca. 13GB. Please find attached archive with .torrent file.

All you need are located in /opt directory. 
1. su - 
2. You should place your config to /opt/litehm2/configs
3. From /opt/litehm2/ enter make

If your config is correct then during compilation, a message will appear about the unavailability of the "xst" component.
Enter the command
. /opt/Xilinx/14.7/ISE_DS/settings64.sh

Again make

Successful compilations

 

Attachment not found

tried to download... still online??

Yes, it is online.
What's not working for you?

No seeders even with a proxy

1 seeder available
12 trackers are working

I can only advise you to be patient and wait

I sent .torrent few friends around the world. result the same. I dont know how it possible. any other way to download your VM?

我在中国 使用迅雷 开通会员 能够下载VM成功

youtube.com/shorts/cUynUCj1Hjs?si=hMw2j6YGzbqIKaTd

thank you. great work.

  Hello sir, there is a problem when compiling the 901t firmware in the virtual machine created by Debian 9. How to solve it?