Brother TC-225 / TC-229 adventure!

More
9 years 2 months ago #98114 by PCW
Replied by PCW on topic Brother TC-225 / TC-229 adventure!
Yow!
Take it easy

Please Log in to join the conversation.

More
9 years 2 months ago #98118 by ihavenofish
Replied by ihavenofish on topic Brother TC-225 / TC-229 adventure!
8ipm jog same pod settings as before

Please Log in to join the conversation.

More
9 years 2 months ago #98120 by PCW
Replied by PCW on topic Brother TC-225 / TC-229 adventure!
Still not clear where the HF noise is coming from

Can you try the same with D=0 (You really should not need D in velocity mode)

Please Log in to join the conversation.

More
9 years 2 months ago #98121 by ihavenofish
Replied by ihavenofish on topic Brother TC-225 / TC-229 adventure!
No d is similar looking. I'll do a plot in a bit.

Please Log in to join the conversation.

More
9 years 2 months ago #98122 by ihavenofish
Replied by ihavenofish on topic Brother TC-225 / TC-229 adventure!
D 0

I'm looking at a out and I see it is almost exactly as f error. This seems odd to me

Please Log in to join the conversation.

More
9 years 2 months ago #98123 by Todd Zuercher
Replied by Todd Zuercher on topic Brother TC-225 / TC-229 adventure!
What were your PID, FF1. FF2, and Deadband settings for the above 2 plots?

Please Log in to join the conversation.

More
9 years 2 months ago #98125 by ihavenofish
Replied by ihavenofish on topic Brother TC-225 / TC-229 adventure!
Look back a few posts.

Please Log in to join the conversation.

More
9 years 2 months ago #98127 by Todd Zuercher
Replied by Todd Zuercher on topic Brother TC-225 / TC-229 adventure!
I went back through 5 pages and didn't see it.

Please Log in to join the conversation.

More
9 years 2 months ago #98128 by ihavenofish
Replied by ihavenofish on topic Brother TC-225 / TC-229 adventure!
Doh it's in one of the screen grabs.

P 150
I .02
D .2

Ff0 0
Ff1 .87
Ff2 .00105

Bias 0
Dead band. 00001

Please Log in to join the conversation.

More
9 years 2 months ago #98129 by Todd Zuercher
Replied by Todd Zuercher on topic Brother TC-225 / TC-229 adventure!
I think I would try reducing P to about 100 and setting I and D to 0. See if that gets a mostly smooth velocity plot. Then fine tune FF1 and FF2 to minimize the following error. Once there, then you should be able to add back some more P to try to stiffen things up.

Please Log in to join the conversation.

Time to create page: 0.887 seconds
Powered by Kunena Forum