4-Axis indexing tool path crosses stock

Hi!

I have generated g-code in Fusion360 which machines 3 faces of a cube (on a 4-axis machine, B-Axis). It seems to work, except, when the tool moves from one operation to the next, it chooses the shortest path, which means going through the stock. See video.

I am not even sure where to change this behaviour; CAM setup, post processor, LCNC?

Could you give me some pointers?

Cheers,
Dimos

Look at the simulation in F360 and do your corrections there in CAM.

deemoss wrote: I am not even sure where to change this behaviour; CAM setup, post processor, LCNC?

Definitely something to fix in the CAM.

I am not at a machine with Fusion installed at the moment, so can't show you where to change this.

Thanks guys, I will check the CAM and report on the progress.