Cam for Lathe?

More
2 years 5 months ago #301619 by Holzwurm56
Cam for Lathe? was created by Holzwurm56
Hello,
Does anyone know a simple cam program for lathes? The simpler the better.
Thanks
Hans

Please Log in to join the conversation.

More
2 years 5 months ago #301620 by jimmyrig
Replied by jimmyrig on topic Cam for Lathe?
Les over at sheetcam is making a lathe add on, currently free as it is in development. (Sheetcam cost 140 bucks)

Fusion 360s lathe cam isn't terrible difficult but not easy either


Maybe freecad has a lathe. Not sure on this one

Please Log in to join the conversation.

More
2 years 5 months ago #301621 by COFHAL
Replied by COFHAL on topic Cam for Lathe?
www.e-cam.it/

Please Log in to join the conversation.

More
2 years 5 months ago #301624 by tommylight
Replied by tommylight on topic Cam for Lathe?
forum.linuxcnc.org/41-guis/26550-lathe-macros?start=0

Please Log in to join the conversation.

Time to create page: 0.089 seconds
Powered by Kunena Forum