Spindle configuration

More
9 years 7 months ago #89950 by Nondepietjes
Replied by Nondepietjes on topic Spindle configuration
Yes, that of the RF. Disable led.

in my hal.file my spindle-on isn't connected. to witch pin should i connect it?

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
9 years 7 months ago #89951 by andypugh
Replied by andypugh on topic Spindle configuration
spindle-on in your HAL is created but not used. Just delete it.
It looks to be left over from a previous config or edit or something.

Your drive seems to have two separate enable inputs, Ready-for-operation and Controller-ready.
Try connecting one to the halui.machine.is-on HAL pin.

Please Log in to join the conversation.

More
9 years 7 months ago #89952 by Nondepietjes
Replied by Nondepietjes on topic Spindle configuration
Can you give some tips or an example?

So i don't have to connect extra cables? I'm searching a long time on this and i'm totaly lost ;p

Please Log in to join the conversation.

More
9 years 7 months ago #89961 by andypugh
Replied by andypugh on topic Spindle configuration

Nondepietjes wrote: Can you give some tips or an example?

So i don't have to connect extra cables? I'm searching a long time on this and i'm totaly lost ;p


No, I think you do need to connect extra cables, and one of the cables needs to be controlled from HAL by halui.machine.is-on (or any other pin that you want to use, like axis.0.amd-enable-out)

Please Log in to join the conversation.

More
9 years 7 months ago #89967 by tommylight
Replied by tommylight on topic Spindle configuration
Sorry to intervene, but:
axis.0.amd-enable-out
Should be
axis.0.cmd-enable-out

Please Log in to join the conversation.

More
9 years 7 months ago #89976 by andypugh
Replied by andypugh on topic Spindle configuration

tommylight wrote: Sorry to intervene, but:
axis.0.amd-enable-out
Should be
axis.0.cmd-enable-out


Actually, I was trying for amp-enable-out, but mis-typing from memory.

Please Log in to join the conversation.

More
9 years 7 months ago #89984 by Nondepietjes
Replied by Nondepietjes on topic Spindle configuration
Thank you for the explenation. i will let know how it went

Please Log in to join the conversation.

More
9 years 7 months ago #90048 by Nondepietjes
Replied by Nondepietjes on topic Spindle configuration
Hi,

I don't find the right connections on my panel. i have not enough information about my panel.
Maby does someone know more about this panel?
Here are some pictures from my X2 panel.

Attachment not found

Please Log in to join the conversation.

More
9 years 7 months ago #90051 by andypugh
Replied by andypugh on topic Spindle configuration
The PCB has screen-printed legends on it, those are almost certain to be consistent with the description of the other panels in the documentation.
So, it should be possible to work out what each terminal is for from the screen-print and the manual.

Please Log in to join the conversation.

More
9 years 7 months ago #90055 by Nondepietjes
Replied by Nondepietjes on topic Spindle configuration
i know thate the black, white, brown and green wire are going to the tacho of the motor. the blue whire on the left, number one is a ground. al the other whires i didn't find. and in the manual that is available is alsow nothing to find.

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.217 seconds
Powered by Kunena Forum