Gantry machine progress

Yannis wrote: i try to select a line to run i file from the middle with no result
any suggestions?

Which user interface are you using?

Hi
i m using Axis

Then you should be able to right-click on a line in the G-code and select "run from here".
Be aware that you probably need to manually start the spindle and coolant.
It is generally safest to start from a tool-change or, at the very least, from a G0 command.

Run-from-line is dangerous, use with caution.

andypugh wrote Run-from-line is dangerous, use with caution.
what else sud i be aware except spindle ,coolant, or wrong G0 or G1

The tool needs to be able to travel to the specified start position without crashing through the part...

The latest ini and hal file hope to be useful for someone(use with caution)

still trying to correct the spindle on off signal

# external output signals

# --- SPINDLE-ON ---
net spindle-on hm2_5i25.0.7i77.0.0.output-00

net spindle-index-enable <=> pid.s.index-enable
net spindle-enable => pid.s.enable
net spindle-vel-cmd-rpm => pid.s.command
net spindle-vel-fb-rpm => pid.s.feedback
net spindle-output <= pid.s.output

# ---setup spindle control signals---

net spindle-vel-cmd-rps <= motion.spindle-speed-out-rps
net spindle-vel-cmd-rps-abs <= motion.spindle-speed-out-rps-abs
net spindle-vel-cmd-rpm <= motion.spindle-speed-out
net spindle-vel-cmd-rpm-abs <= motion.spindle-speed-out-abs
net spindle-enable <= motion.spindle-on
net spindle-cw <= motion.spindle-forward
net spindle-ccw <= motion.spindle-reverse
net spindle-brake <= motion.spindle-brake
net spindle-revs => motion.spindle-revs
net spindle-at-speed => motion.spindle-at-speed
net spindle-vel-fb-rps => motion.spindle-speed-in
net spindle-index-enable <=> motion.spindle-index-enable

# ---Setup spindle at speed signals---

sets spindle-at-speed true

Yannis wrote: still trying to correct the spindle on off signal

You seem to have an inconsistent signal naming.
Use the same signal name in both places.

Hi
as i understand the files that the linux cnc look is in the FILTER SECTION
what sud i write so it look for all files?


[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image,
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python

You don't necessarily have to change anything. You can just click on the "All Files" choice under "Files of type".