mesa 7i47S as 3 axis stepper driver

8 years 8 months ago #105644 by mpvriens

Replied by mpvriens on topic mesa 7i47S as 3 axis stepper driver

"watch of halmeter doesn't show the toggle,
Is there a solutions on this?

Please Log in to join the conversation.

8 years 8 months ago #105645 by PCW

Replied by PCW on topic mesa 7i47S as 3 axis stepper driver

can you post your current hal and ini files
Something very basic is wrong if you cannot control output pins

Please Log in to join the conversation.

8 years 8 months ago #105646 by mpvriens

Replied by mpvriens on topic mesa 7i47S as 3 axis stepper driver

please see attached the hal and ini

Please Log in to join the conversation.

8 years 8 months ago #105648 by PCW

Replied by PCW on topic mesa 7i47S as 3 axis stepper driver

Hal file is missing this:

addf hm2_5i24.0.write servo-thread

it should come after:

addf classicladder.0.refresh servo-thread

Please Log in to join the conversation.

8 years 8 months ago #105651 by mpvriens

Replied by mpvriens on topic mesa 7i47S as 3 axis stepper driver

Output is working, thanks a milion.

Please Log in to join the conversation.

8 years 8 months ago #105652 by PCW

Replied by PCW on topic mesa 7i47S as 3 axis stepper driver

Nothing is going to work ( except the initial driver setup ) without periodic writes

Please Log in to join the conversation.

Time to create page: 0.055 seconds