5i25-7i76 Kit vs 7i76E which one should i buy? HELP!

Good morning, I am building a 3 axis router with hybrid motors, I am looking for controllers and I came across the kit 5i25-7i76 that seems to be easier to setup, also saw 7i76E for the same price all in one ethernet card, which do you recommend? Is 7i76e easy to set up? Does the linuxcnc wizard configurator work on this board?

There is a 7i96 that is cheaper and has everything you need and more, ethernet only.

Another Ethernet option to consider is the 7i96.

I would say the Eithernet options are a little trickier to set up. Because you have to properly configure the network cards in Linux to make sure that Linux doesn't try to use the one used for Linuxcnc for anything else.

i found some tutorials how to config 7i76E, i think its pretty easy video ,
7i76e i can use wizard, but i couldnt find 7i96. There is some tutorial?

i forgot to say, 7i96 has two version, 5 Stepgens and 4 Stepgens 1 PWM, pwm? to control spindle?

Tavares wrote: but i couldnt find 7i96. There is some tutorial?

See here:- forum.linuxcnc.org/27-driver-boards/3504...6-configuration-tool

iam almost buying 7i76e, but this board will work with pentium 4 3.0ghz 1gb ram?

yes ofcause the PC is no Factor at ETH
you coudt also considder a very cheep 7i92 to fit your already existiing hardware parport system

IF you are alredy up the Budget go for the 7i76e