New Project with Mesa 7I96 and THCAD-05

More
5 years 5 months ago #209959 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
If you have HOME_SEQUENCE = <n> in all your [JOINT_n] sections then you will have a home all button.

Homing does not set zero, it only homes the selected axis (or all axes) you then need to TOUCHOFF for each axis, that will set zero.

I don't know why the LED would blink, did you try PCW's suggetions here

Please Log in to join the conversation.

More
5 years 5 months ago #209963 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
I haven’t been trying to find an example on how to add the debounce. How would I do that?

Please Log in to join the conversation.

More
5 years 5 months ago #209965 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
There "should" be debounce setup in the <machine>_connections.hal file already, check it out and if you are not sure post the file here.

Please Log in to join the conversation.

More
5 years 5 months ago #209966 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05

Attachment not found

Please Log in to join the conversation.

More
5 years 5 months ago #209970 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
Give this one a try, you can change the value in this line if needed. Hopefully I got it right, it is untested.
Code:
setp db_arc-ok.delay 5

Please Log in to join the conversation.

More
5 years 5 months ago #209971 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
it gave me an error on starting up the gui

Please Log in to join the conversation.

More
5 years 5 months ago #209972 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
What is the error?

Please Log in to join the conversation.

More
5 years 5 months ago #209974 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
Dbounce: dlopen: /use/lib/linuxcnc/modules/dbounce.so: cannot open shared object
Twopass: load the modules cmd=<orig_loadrt dbounce names=db_arc-ok>

Please Log in to join the conversation.

More
5 years 5 months ago #209976 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
Weird, I don't know what that means, maybe the different debounce components conflict.

Try this one instead.

Please Log in to join the conversation.

More
5 years 5 months ago #209977 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
Error here is the full error

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.216 seconds
Powered by Kunena Forum