I'm at a bit of a loss where to start looking at this.
I am migrating to a new PC for my mill while upgrading to 2.9.0pre LinuxCNC. Mostly painless on the software side, but I cannot get a gmoccapy tab to load. Here is a description of the system as it was, which includes a screen shot showing the Spindle Monitor tab in (over?) the Preview section of the screen:
forum.linuxcnc.org/show-your-stuff/41282...-spindle-pendant-etc
What I am seeing now is just the plain un-tabbed preview window. My .ini [DISPLAY] section is just the same as it was:
Code:
[DISPLAY]
DISPLAY = gmoccapy
CYCLE_TIME = 150
<etc...>
EMBED_TAB_NAME = Spindle Monitor
EMBED_TAB_LOCATION = ntb_preview
EMBED_TAB_COMMAND = gladevcp -x {XID} -H Sp_mon_2.hal Sp_mon_2.glade
EMBED_TAB_NAME = tool sensor
EMBED_TAB_LOCATION = box_right
EMBED_TAB_COMMAND = gladevcp -x {XID} -H tool_sensor3.hal tool_sensor3.glade
EMBED_TAB_NAME = Spindle Button
EMBED_TAB_LOCATION = box_custom_4
EMBED_TAB_COMMAND = gladevcp -x {XID} -H spindle_button.hal spindle_button.glade
All the associated HAL files are also unchanged. The other two EMBED_TABs are fine. The spindle driver python script is working fine, and all the output pins are correct. If I set EMBED_TAB_LOCATION to other values (box_right, ntb_user_tabs,..), these work as expected.
I tried running linuxcnc with -d, and gladevcp with -d, but nothing leaps out, except maybe this?
Code:
/usr/bin/gmoccapy:3377: DeprecationWarning: Gtk.FontButton.get_font_name is deprecated
self.notification.set_property('font', self.widgets.fontbutton_popup.get_font_name())
/usr/bin/gmoccapy:378: DeprecationWarning: Gtk.FontButton.set_font_name is deprecated
self.widgets.fontbutton_popup.set_font_name(self.prefs.getpref("message_font", "sans 10", str))
/usr/bin/gmoccapy:473: DeprecationWarning: Gtk.ColorButton.set_color is deprecated
self.widgets.abs_colorbutton.set_color(Gdk.color_parse(self.abs_color))
toolchange_postgui.hal:21: Warning: File contains DOS-style line endings.
71303175
spindle_button.hal:11: Warning: File contains DOS-style line endings.
69206019
(gladevcp:3356): Gtk-WARNING **: 20:22:45.743: gtk_widget_size_allocate(): attempt to allocate widget with width -3 and height 684
(gladevcp:3356): Gtk-WARNING **: 20:22:45.743: Negative content width -1 (allocation 1, extents 1x1) while allocating gadget (node border, owner GtkFrame)
(gladevcp:3356): Gtk-WARNING **: 20:22:45.743: Negative content width -33 (allocation 1, extents 17x17) while allocating gadget (node button, owner HAL_ToggleButton)
My problem is I don't know how to proceed. If anyone knows the cause, or can suggest a way to proceed, I'm all ears.
