Setting Up Carousel Tool Changer

I used this article to set up my 10 pocket carousel tool changer:
forum.linuxcnc.org/10-advanced-configura...carousel-in-linuxcnc

I added the following to the ".ini" file:[RS274NGC]
REMAP= M6 modalgroup=6 prolog=change_prolog ngc=toolchange epilog=change_epilog

I have toolchange.ngc in the nc_files folder.

This error pops up when LinuxCNC is started:

 
Can someone tell me what I did wrong?

Thanks,
Mike

 

In your config file, do you have a 'python' sub-folder with
remap.py
toplevel.py
stdglue.py

in it?

As I am also finding out, remapping is non-trivial for beginners.

That fixed it!

Thank you,
Mike

spumco wrote:

In your config file, do you have a 'python' sub-folder with
remap.py
toplevel.py
stdglue.py

in it?

As I am also finding out, remapping is non-trivial for beginners.

Just as beginner, where are these files available?

Depends on your installation, but should be something like this:

linuxcnc/configs/your-config-name/python/

and 'your-config-name' is the name of your configuration.  Like 'axis' or 'my_cnc'