QtVismach installation in Linuxcnc (debian wheezy)

More
3 years 6 months ago #268240 by fery15sty
QtVismach installation in Linuxcnc (debian wheezy) was created by fery15sty
Hello can help me..

how to install Qt Vismach panel in AXIS gui, I use Linuxcnc (Debian Wheezy)


I tried to enter the script:
######################!/usr/bin/env python3

import hal
import math
import sys

from qtvcp.lib.qt_vismach.qt_vismach import *


etc
###############

Please Log in to join the conversation.

More
3 years 6 months ago #268270 by cmorley
Replied by cmorley on topic QtVismach installation in Linuxcnc (debian wheezy)
This seems like an error message related to python version.
What version of linuxcnc are you using?

I dont think I have tried qtvismach with python 2 but it's probably possible.

Please Log in to join the conversation.

More
3 years 6 months ago #268312 by fery15sty
Replied by fery15sty on topic QtVismach installation in Linuxcnc (debian wheezy)
I using linuxcnc 2.7.15 in debian wheezy.

Maybe the qt vismach library needs to be added?

Please Log in to join the conversation.

More
3 years 6 months ago #268313 by fery15sty
Replied by fery15sty on topic QtVismach installation in Linuxcnc (debian wheezy)
I had python 3.2 installed when I tried it.

Are there certain libraries that need to be downloaded? maybe qt-vismach library??

Please Log in to join the conversation.

More
3 years 6 months ago #268314 by cmorley
Replied by cmorley on topic QtVismach installation in Linuxcnc (debian wheezy)
I do believe linuxcnc 2.7 / wheezy is too old. It might be possible with a lot of work, but I don't have a system to even try it.

If it's a need I would suggest moving up to a new version of linuxcnc, but only if it's a need.

Please Log in to join the conversation.

More
3 years 6 months ago #268373 by fery15sty
Replied by fery15sty on topic QtVismach installation in Linuxcnc (debian wheezy)
Ok.. i have installed debian 10. but i can't move vismach simulation to axis tab like your example..please guide me step by step, what should i do?

Please Log in to join the conversation.

More
3 years 6 months ago #268375 by cmorley
Replied by cmorley on topic QtVismach installation in Linuxcnc (debian wheezy)
Is there a sim screen called:
axis/qtvcp/qtvismach_tab ?

Does it work?

Please Log in to join the conversation.

More
3 years 6 months ago #268384 by fery15sty
Replied by fery15sty on topic QtVismach installation in Linuxcnc (debian wheezy)
No where do i find? axis/qtvcp/qtvismach_tab ?

Please Log in to join the conversation.

More
3 years 6 months ago #268385 by fery15sty
Replied by fery15sty on topic QtVismach installation in Linuxcnc (debian wheezy)
I found several directories that contain qtvcp

Please Log in to join the conversation.

More
3 years 6 months ago #268387 by fery15sty
Replied by fery15sty on topic QtVismach installation in Linuxcnc (debian wheezy)
Sorry my english is not good. I'm from Indonesia. English isn't my first language, so please excuse any mistakes.

Please Log in to join the conversation.

Time to create page: 0.096 seconds
Powered by Kunena Forum