QtVismach installation in Linuxcnc (debian wheezy)

3 years 6 months ago #268389 by fery15sty

Replied by fery15sty on topic QtVismach installation in Linuxcnc (debian wheezy)

i found qtvcp_tab.ini

Please Log in to join the conversation.

3 years 6 months ago #268404 by tommylight

Replied by tommylight on topic QtVismach installation in Linuxcnc (debian wheezy)

Right click on it, choose "open with" , near the bottom should be "use custom command" or similar, type linuxcnc there and click open.

Please Log in to join the conversation.

3 years 6 months ago #268425 by cmorley

Replied by cmorley on topic QtVismach installation in Linuxcnc (debian wheezy)

Looks like you are stilling using a python 2 based linuxcnc.

Please Log in to join the conversation.

3 years 6 months ago #268476 by fery15sty

Replied by fery15sty on topic QtVismach installation in Linuxcnc (debian wheezy)

How to moving tk vismach simulation to qtvcp tabs in axis?

Please Log in to join the conversation.

3 years 6 months ago #268615 by cakeslob

Replied by cakeslob on topic QtVismach installation in Linuxcnc (debian wheezy)

Looks like you almost got it, but I think that is regular vismach with the qtvcp camera tab

Code:

EMBED_TAB_COMMAND= halcmd loadusr -Wn qtvcp_embed qtvcp -d -c qtvcp_embed  -x {XID} cam_align

replace cam_align with what ever QtVismach is called

Also, need to set up vismach for qtvismach
linuxcnc.org/docs/devel/html/gui/qtvcp-vismach.html

Please Log in to join the conversation.

3 years 6 months ago #268634 by rodw

Replied by rodw on topic QtVismach installation in Linuxcnc (debian wheezy)

fery15sty wrote:
Sorry my english is not good. I'm from Indonesia. English isn't my first language, so please excuse any mistakes.

Amazing. I just walked back in our house after flying back from Indonesia overnight!

Please Log in to join the conversation.

Time to create page: 0.057 seconds