axis select

3 years 1 month ago #281702 by phillc54

Replied by phillc54 on topic axis select

Oops, when I tested Buster I was still on LinuxCNC 2.9.

Edit: Code fixed here

Please Log in to join the conversation.

3 years 1 month ago #281704 by phillc54

Replied by phillc54 on topic axis select

I will run up a 2.8 build on Buster tomorrow and sort it out then.

Edite: Done, code fixed here

Please Log in to join the conversation.

2 years 3 months ago #306136 by COFHAL

Replied by COFHAL on topic axis select

How could this file work with xhc-whb04b-6?

Please Log in to join the conversation.

2 years 3 months ago #306139 by tommylight

Replied by tommylight on topic axis select

What did "fomer" do to get disabled?
I can not find any post from him, ever, deleted or otherwise.

Please Log in to join the conversation.

Time to create page: 0.077 seconds