How to turn off unexpected real-time delay prompts

More
2 years 10 months ago #287091 by onceloved
How to turn off unexpected real-time delay prompts was created by onceloved
如何关闭意外的实时延时提示
我使用三轴Ethercat伺服电机
我的手轮连接到并口，经常出现这种情况。
周期为 200000 的任务 0 出现意外的实时延迟，

Please Log in to join the conversation.

More
2 years 10 months ago #287257 by tommylight
Replied by tommylight on topic How to turn off unexpected real-time delay prompts

How to turn off unexpected real-time delay prompts
I use three axis Ethercat servo motor
My handwheel is connected to the parallel port and this happens frequently.
Unexpected real-time delay for task 0 with period 200000,
forum.linuxcnc.org/38-general-linuxcnc-q...-delay-error-message
forum.linuxcnc.org/38-general-linuxcnc-q...ected-realtime-delay

Please Log in to join the conversation.

Time to create page: 0.071 seconds
Powered by Kunena Forum