playing a g-code file using a input pin

More
2 years 5 months ago #300618 by Ehsan_R
playing a g-code file using a input pin was created by Ehsan_R
I have several different programs that I want to connect each to an input pin so that when that pin is activated, the corresponding GCODE file will be executed.
Is such a thing possible?

Please Log in to join the conversation.

More
2 years 5 months ago #300654 by Aciera
Replied by Aciera on topic playing a g-code file using a input pin
Maybe this helps:
forum.linuxcnc.org/21-axis/51920-help-cr...c-g-code-file#295134

Please Log in to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum