linuxcnc_2.9.4-amd64.hybrid.iso cheksum?

Hi all can anyone tell me where to find "linuxcnc_2.9.4-amd64.hybrid.iso" cheksum? 
is it " ?? have a nice day all

i have tied 3 times but i now think some of my faults are regarding www.forum.linuxcnc.org/9-installing-linu...cnc-in-november-2025
and so

I just created this from a known good download. Just remove the .txt bit of the download to check.
 

Make sure to download from here:
www.linuxcnc.org/iso/
As this is the official site and the safest option.

Tried first reinstall 2.9.4, that did not help. then i installed "linuxcnc_2.9.3-amd64.hybrid" same problems as before+ expkey signature not valid due to age, but that's ok ish.. . I think there are a "update" being loaded on install or right after that bugs it. .
one thing i don't get also is when i installed 2.9.7 first time it showed Debian 13 with "red theme" ??
...... i think i will put the install on pause for some days because i am going insane lol .. thx for helping

thank you I decided to take a few days brake on this reinstall.. "note to myself dont touch things that work lol"

Give this a try
forum.linuxcnc.org/9-installing-linuxcnc...an-edition-6?start=0
or if you are OK with 2.10 version dating nearly a year back, try this
forum.linuxcnc.org/9-installing-linuxcnc...-1-linuxcnc-2-10-iso

Hi all, i tested again today with a fresh download of  2.9.4 from the main page. And now i am stuck as all the other ones are at, the missing "amdpgu fault". 
Was there a solution on that fault ?, i cant decipher if there was one, on all the other forum posts with that fault. 
ibb.co/G4FrwL3t

If there is not a solution i will try the "mint" Tommylight uploaded

You can search Debian install amdgpu fault via Google or you can try the text installer.

Is that "missing amd gpu firmware something or another"?
That is not a fault, just a warning about missing firmwares for older GPU's.

Not the best suggestion if the user wants to be able to upgrade to 2.9 or 2.10.

Unless a user specifically wants to use the parallel or has an ancient PC it may not be the best suggestion .
It would also be worth noting that Debian wheezy is end of life, updates haven't been available for a few years. Also wheezy had Python2 so the upgrade path for Linuxcnc is rather limited.
So when recommending the Debian Wheezy ISO it would be best to mention these facts.