axis/tune error

PCW wrote: [TRAJ]
AXES = 3
COORDINATES = X Z
LINEAR_UNITS = mm
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 2.50
MAX_VELOCITY = 25.00 <<<<<<<<<<<<<<<<<<<< = 1500 mm/m

I think I am going to sit in the corner for a while.

Thank you...I just over looked it..
Never had to do that with my mill, so never thought about it.

That is the overall maximum velocity(any direction)

There are at least 5 settings that will affect the maximum velocity...