pncconfig error

More
5 years 11 months ago #188534 by kevin19
Replied by kevin19 on topic pncconfig error
thank you, so should I leave the other inputs unused or is there a way to configure enable, fullste, fault and reset functions?

Please Log in to join the conversation.

More
5 years 11 months ago #188541 by PCW
Replied by PCW on topic pncconfig error
You would need to connect these by hand in the hal file

Please Log in to join the conversation.

More
5 years 11 months ago #188737 by kevin19
Replied by kevin19 on topic pncconfig error
Hello, I am getting this permission denied error? How can I solve it?

Attachment not found


Attachment not found

Please Log in to join the conversation.

More
5 years 11 months ago #188755 by PCW
Replied by PCW on topic pncconfig error
looks like you might not have done the:

sudo make setuid

step when building

Please Log in to join the conversation.

More
5 years 11 months ago #188767 by kevin19
Replied by kevin19 on topic pncconfig error
I got this

Attachment not found

Please Log in to join the conversation.

More
5 years 11 months ago #188769 by PCW
Replied by PCW on topic pncconfig error
You need to run that from

~/linuxcnc-dev/src

Please Log in to join the conversation.

More
5 years 11 months ago #188772 by kevin19
Replied by kevin19 on topic pncconfig error
ok thank you, I did sudo make setuid from linuxcnc-dev/src and I got this:

Attachment not found

Attachment not found

Please Log in to join the conversation.

More
5 years 11 months ago #188848 by kevin19
Replied by kevin19 on topic pncconfig error
I think the problem is that rtapp_app is locked as root. How can I change the permissions?

Attachment not found

Please Log in to join the conversation.

More
5 years 11 months ago #189147 by kevin19
Replied by kevin19 on topic pncconfig error
In pncconf when i go forward from the VCP page i get the following error, can someone help me out please?

Attachment not found

Please Log in to join the conversation.

More
5 years 11 months ago #189167 by PCW
Replied by PCW on topic pncconfig error
It looks like your LinuxCNC installation is broken in some basic way

How did you install LinuxCNC?

Please Log in to join the conversation.

Time to create page: 0.069 seconds
Powered by Kunena Forum