7i76e with PWM, 4 step gen AND TB5 and TB6

More
4 years 5 months ago #242553 by koopa
Replied by koopa on topic 7i76e with PWM, 4 step gen AND TB5 and TB6
INI file did the trick. At least just 1 spot to change.

I think when I did the discover I entered "7i76e-16", let me try it again.

Please Log in to join the conversation.

More
4 years 5 months ago #242554 by koopa
Replied by koopa on topic 7i76e with PWM, 4 step gen AND TB5 and TB6
Ah,
Code:
[code]greg@cutty:~/linuxcnc/configs/shapeoko$ mesaflash --device 7I76E-16 --addr 10.10.10.10 --readhmid [code]ETH device 7I76E-16 at ip=10.10.10.10 7I76E-16 Configuration Name: HOSTMOT2 General configuration information: BoardName : MESA7I76 pncconf probably picked the board name up from there?
Is this a result of flashing 7i76e_7i76x1pD.bit?[/code][/code]

Please Log in to join the conversation.

More
4 years 5 months ago #242555 by PCW
Replied by PCW on topic 7i76e with PWM, 4 step gen AND TB5 and TB6
No, on Ethernet cards the name is not the FPGA/HM2 name (MESA7I76)

Did you try "7I76E" with the discovery option? it works for me

Please Log in to join the conversation.

More
4 years 5 months ago #242640 by koopa
Replied by koopa on topic 7i76e with PWM, 4 step gen AND TB5 and TB6
Running 2.8.2 iso

If I enter "7i76e" when asked, it will say "Boardname: discovered:7i76". I then have to enter the number of connectors, number of pins and interface type.

Please Log in to join the conversation.

More
4 years 5 months ago #242642 by PCW
Replied by PCW on topic 7i76e with PWM, 4 step gen AND TB5 and TB6
Looks like a pncconf discovery bug in 2.8?

2.9:

Attachment not found

Please Log in to join the conversation.

More
4 years 5 months ago #242644 by koopa
Replied by koopa on topic 7i76e with PWM, 4 step gen AND TB5 and TB6
If it's working in 2.9, any point in opening an issue for 2.8.2 on GitHub?

Please Log in to join the conversation.

More
4 years 5 months ago #242652 by PCW
Replied by PCW on topic 7i76e with PWM, 4 step gen AND TB5 and TB6
Yes, because updating to 2.9 is a major step because of all the Python2-3 changes

Please Log in to join the conversation.

Time to create page: 0.051 seconds
Powered by Kunena Forum