7i95T PnCConf 1PWM

I download the firmware for 7i95T. I found 7i95t_1pwmd.bin , 7i95t_1pktv2d.bin What should I use to have 1pwm on P1 wiht cina5axisbob? Or where can I find firmware that outputs PWM on a serial TX output? 

What linuxcnc version is available  Pncconf for 7i95T

7i95t_1pwmd.bin steals one step/dir output for PWM/DIR

What do you actually need the PWM for? If for the analog output
on a 5ABOB, you would need a configuration specifically for that.
 
I think you need LinuxCNC master or recent 2.9  for 7I95T support
though ol;der version will work, you just get some complaints at startup
and may need to change the card name.

You can use a 7I95 configurations on the 7I95T so older pncconf versions
will work.

I use 6 axis on 7i95T. and want to use PWM spindle on P1 with 5ABOB.

Can I use this file? 7i95_p1pwmd.zip form link
forum.linuxcnc.org/38-general-linuxcnc-q...0-10v-spindle-output

or help create a new one for 7I95T+5Abob

or help create a new one for 7I95T+5Abob

I can do this is the next day or so

PCW wrote:

I can do this is the next day or so

Thank you for your support.

7I95T configuration for 5ABOB on expansion connector:

 
 

PCW wrote:

7I95T configuration for 5ABOB on expansion connector:

 

Attachment not found

 

I use 2.8.4 and 2.9.0-pre 1-1094-g1718e100 Checked the Pncconf board name and didn't find 7i95. Am I missing something?

I want to know the meaning of 7i95t_1pktv2d.bin

Thank you for your support.
 

I don't think pncconf supports the 7I95/7I95T though you could make a
configuration for say a 7I96S as a start. You would need to change the
card name and the input names and a minimum. You could also try MesaCT.

The 7I95T also needs LinuxCNC 2.9 or greater

7i95t_1pktv2d.bin is firmware the replaces one sserial expansion port with a
PacketUART (for Modbus support)

EDIT:

Looks like someone is adding 7I95T support to pncconf:

forum.linuxcnc.org/39-pncconf/50272-addi...iguration-to-pncconf

I read the thread you recommended. And I've tried using Mesa CT, but Hal and ini are not familiar with it. I will continue to use it.
thank you