Lathe Macros

More
3 years 11 months ago #256543 by Masiwood123
Replied by Masiwood123 on topic Lathe Macros
Thank you will try tomorrow

Please Log in to join the conversation.

More
3 years 11 months ago #256568 by Masiwood123
Replied by Masiwood123 on topic Lathe Macros
 

Attachment not found


if i load correctly, this is reported to me via the linuxcnc`` command. like some duplication of gladevcp.

Please Log in to join the conversation.

More
3 years 11 months ago #256581 by andypugh
Replied by andypugh on topic Lathe Macros
OK, you need to change the name of at least one of your GladeVCP panels (In the INI)

See the -Wn option for loadusr:

linuxcnc.org/docs/stable/html/man/man1/halcmd.1.html

So, for example:
Code:
EMBED_TAB_COMMAND = halcmd loadusr -Wn lathemacro gladevcp -c lathemacro -U notouch=1 -U norun=0 -u lathehandler.py -x {XID} lathemacro.ui

Please Log in to join the conversation.

More
3 years 11 months ago #256586 by Masiwood123
Replied by Masiwood123 on topic Lathe Macros
 

Attachment not found

 

Attachment not found



sorry but i am stupid with this commands, and cant understand;)

this is the last good config i can open without errors but cycles`` is also blank screen
please modify and back. Thank you

Please Log in to join the conversation.

More
3 years 11 months ago #256587 by andypugh
Replied by andypugh on topic Lathe Macros
Try this INI

Please Log in to join the conversation.

More
3 years 11 months ago #256589 by Masiwood123
Replied by Masiwood123 on topic Lathe Macros
 

Attachment not found

I tried that too, but I get this error

Please Log in to join the conversation.

More
3 years 11 months ago #256590 by andypugh
Replied by andypugh on topic Lathe Macros
I think you must be using the old version of the macros?

That's a Python2-to-Python3 thing.

Please Log in to join the conversation.

More
3 years 11 months ago #256591 by Masiwood123
Replied by Masiwood123 on topic Lathe Macros
I used the version from the first page of the post (latheMacros3.zip)  will try to replace files..

Please Log in to join the conversation.

More
3 years 11 months ago #256597 by andypugh
Replied by andypugh on topic Lathe Macros
You shouldn't need to be registered.
I have collected all the versions as .zip files here:

github.com/andypugh/LatheMacros/releases

You should expaned the "Assets" of v3.0 and download the .zip file.

Please Log in to join the conversation.

More
3 years 11 months ago #256599 by Masiwood123
Replied by Masiwood123 on topic Lathe Macros
that's great, thanks a lot, I'll let you know what happens as soon as I try it

Please Log in to join the conversation.

Time to create page: 3.921 seconds
Powered by Kunena Forum