I'm trying to integrate these into gmoccapy but not having much success.
Has anyone been able to?
I can get the tab to appear with the following my INI.
EMBED_TAB_NAME= Cycles
EMBED_TAB_LOCATION= ntb_preview
The tab appears with pictures, spin boxes etc.
I get an error when I press go.
I've tried
EMBED_TAB_COMMAND=halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -u lathehandler.py -x {XID} lathemacro.ui
EMBED_TAB_COMMAND=gladevcp gladevcp -c gladevcp -u lathehandler.py -x {XID} lathemacro.ui
EMBED_TAB_COMMAND=gladevcp -c gladevcp -u lathehandler.py -x {XID} lathemacro.ui
as commands.
I get the following error:
Code:
Emit interp-run
emc/task/emctask.cc 389: interp_error: Named parameter #<_hal[gladevcp.turn.z-f]> not defined
Named parameter #<_hal[gladevcp.turn.z-f]> not defined
/usr/lib/pymodules/python2.7/gmoccapy/notification.py:111: GtkWarning: Failed to set text from markup due to error parsing markup: Error on line 1 char 51: '_hal[gladevcp.turn.z-f]' is not a valid name: '['
label.set_markup(text)
/usr/lib/pymodules/python2.7/gmoccapy/notification.py:125: GtkWarning: Failed to set text from markup due to error parsing markup: Error on line 1 char 51: '_hal[gladevcp.turn.z-f]' is not a valid name: '['
What I would ideally like to do is embed more directly via python, as I'm customising gmoccapy, but I can't for the life of me work out how to do this.
I must admit I don't quite understand how these Lathe Macros actually work, I can't find the code that actually does the cutting.
I understand the GUI generation but not how it does anything with the input values.
EDIT: I see now that HAL_SpinButton etc pass values to Hal. The gcode routines then read these.
EDIT2: I think I've got it working, I'd mixed up config files when I put:
[RS274NGC]
# Enables the reading of INI and HAL values from gcode
FEATURES=12
(and not actually put them in my active config)
Thanks,
Nick
