Lathe GUI for me

More
7 years 3 months ago #140438 by Dinuka_Shehan
Lathe GUI for me was created by Dinuka_Shehan
What is the best gui for lathe mode?

Please Log in to join the conversation.

More
7 years 3 months ago #140444 by pl7i92
Replied by pl7i92 on topic Lathe GUI for me
Axis gives you the Best options
but it is best to go for a Have automatic setup as shown here

Please Log in to join the conversation.

More
7 years 3 months ago #140514 by Dinuka_Shehan
Replied by Dinuka_Shehan on topic Lathe GUI for me
Thank you
I have already watched and downloaded the files from the link on this Youtube video before you comment their.
It is good gui.Can I translate in to English.Some words are in Russian(Global Variables)
Don't you any other gui's?

Please Log in to join the conversation.

More
7 years 3 months ago #140518 by Hakan
Replied by Hakan on topic Lathe GUI for me
I only use gmoccapy and a touch screen. I don't see why axis should be extra good.
The buttons are very small and difficult to hit for example.

Please Log in to join the conversation.

More
7 years 3 months ago #140557 by Dinuka_Shehan
Replied by Dinuka_Shehan on topic Lathe GUI for me
Ok Hakan.
You you got any video about your Cnc lathe machine

Please Log in to join the conversation.

More
7 years 3 months ago #140574 by Hakan
Replied by Hakan on topic Lathe GUI for me
Sure I have.

Please Log in to join the conversation.

More
7 years 3 months ago #140827 by andypugh
Replied by andypugh on topic Lathe GUI for me
I use Touchy and the same macros as Hakan.
I do not have any graphical preview set up with Touchy, but I don't really miss it.

forum.linuxcnc.org/41-guis/26550-lathe-macros?start=150#82743

Please Log in to join the conversation.

Time to create page: 0.741 seconds
Powered by Kunena Forum