Deactivate or increase the soft limit

Hello my name is Stefan Mangold
I registered again here because I have several problems with Linux-CNC.

Use LinuxCNC for a while and face a problem. I built a fourth axis and I want it to run endlessly like a lathe. But don't get the soft limit deactivated or increased.
Soft limit only goes from min / max 99999.
I'm currently using the Axis Screen.
Who can help me please.

Stefan

www.forum.linuxcnc.org/38-general-linuxc...vo-spindle-as-c-axis
forum.linuxcnc.org/10-advanced-configura...question-about-index
forum.linuxcnc.org/38-general-linuxcnc-q...nc-router-as-a-lathe

You misunderstood me. I am satisfied with the function of the fourth axis.
Since Axis-Screen has a limit of min / max 99999
That would like to deactivate the limit

I did comment the limitation in ini file, [AXIS_3], and the A-axis can spin for days.

# MIN_LIMIT = -99999.0
# MAX_LIMIT = 99999.0

Solved my problem
I had the limit in two places
Once in [AXIS A]
and once in [Joint_3]
But only commented in [AXIS A] and not in [Joint_3]
Thanks again

cyberspaceschwabe wrote: You misunderstood me. I am satisfied with the function of the fourth axis.
Since Axis-Screen has a limit of min / max 99999
That would like to deactivate the limit

Sorry about that.