Create CNC process function and CNC process plan:

More
3 years 11 months ago #257365 by tommylight
Create CNC process function and CNC process plan: was created by tommylight
The above post is considered spam, but it is related to cnc machining, cnc turning service in china.
The post originated from USA, but with the proliferation of proxy servers, VPN, and TOR, there is no easy way of confirming.
-
Would be nice if members would voice their mind if this should be deleted or left.
So far we are 2 abstinent and one pro deletion.

Please Log in to join the conversation.

More
3 years 11 months ago #257406 by phillc54
Replied by phillc54 on topic Create CNC process function and CNC process plan:
I think quite a few folk here have a CNC turning service so I don't see the need for these type of posts.

Please Log in to join the conversation.

More
3 years 11 months ago #257428 by spumco
Replied by spumco on topic Create CNC process function and CNC process plan:
+1 delete

Please Log in to join the conversation.

More
3 years 11 months ago #257509 by sirop
Replied by sirop on topic Create CNC process function and CNC process plan:
+1 delete

Please Log in to join the conversation.

More
3 years 11 months ago #257511 by piflixe
Replied by piflixe on topic Create CNC process function and CNC process plan:
+1 delete

Please Log in to join the conversation.

More
3 years 11 months ago #257610 by tommylight
Replied by tommylight on topic Create CNC process function and CNC process plan:
5 are pro, none against deleting this topic.
This topic will be deleted later.
Thank you for voting.

Please Log in to join the conversation.

Time to create page: 0.135 seconds
Powered by Kunena Forum