Upgraded to 2.7.13 -- W T F --

Just updated/upgraded my LCNC and all hell is loose.

Both axis behave badly with shaking motion that I have not seen with 2.7.12



This did pop-up when first starting LCNC = no-go = LCNC hangs = No F1 or F2 works





So WTF is going on with this upgrade?

sounds like you accidentally "upgraded" your OS also
what does
uname -a
print?

Will get back on this asap.

First update then dist-upgrade, is that wrong way to do it?

Lathe


Mill

Mill appears to work as usual, just tested some axis movement + spindle and homing.

OK so that's the correct kernel so maybe the LinuxCNC is not the uspace version (so its running in non-realtime=simulation mode)

Hmmm, just started my normal INI = CNC3000.ini

But unsure as normally I do not have any text in the right panel ( as I recall ) and now there is a lot of text with LatheMacros etc...
Will have to investigate more tomorrow.

Will be without LAN some days as I have to return faulty product for replacement.

So there is nothing I need to do via LAN just now then?

What does linuxcnc print when you start it?
(the first few lines)

Report tomorrow, it is close to bedtime here