- Posts: 1850
- Thank you received: 0
Upgraded to 2.7.13 -- W T F --
8 years 4 months ago #112073
by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --
Hi Peter,
Will do that after my dinner.
Also if you have an Intel MAC you need to set irq coalescing off = sorry I do not understand what you say here, advice pls.
Only change on 2.7.12 was adding Touch and the update / upgrade
Will do that after my dinner.
Also if you have an Intel MAC you need to set irq coalescing off = sorry I do not understand what you say here, advice pls.
Only change on 2.7.12 was adding Touch and the update / upgrade
Please Log in to join the conversation.
8 years 4 months ago #112074
by PCW
Replied by PCW on topic Upgraded to 2.7.13 -- W T F --
Do you have a intel MAC? (check with dmesg | grep eth)
The hm2_eth manual page describes setting the RX IRQ coalescing option
man hm2_eth
The hm2_eth manual page describes setting the RX IRQ coalescing option
man hm2_eth
Please Log in to join the conversation.
8 years 4 months ago #112075
by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --
bengt@CNC3000:~$ dmesg | grep eth
[ 2.365659] r8169 0000:02:00.0 eth0: RTL8102e at 0xf825f000, 00:30:18:a6:5b:cb, XID 14a00000 IRQ 26
[ 2.519553] r8169 0000:02:00.0 enp2s0: renamed from eth0
bengt@CNC3000:~$
Latency test is running now
[ 2.365659] r8169 0000:02:00.0 eth0: RTL8102e at 0xf825f000, 00:30:18:a6:5b:cb, XID 14a00000 IRQ 26
[ 2.519553] r8169 0000:02:00.0 enp2s0: renamed from eth0
bengt@CNC3000:~$
Latency test is running now
Please Log in to join the conversation.
8 years 4 months ago #112078
by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --
Here the histogram
Just started another run with 4 GLX Gears
Attachment not found
Just started another run with 4 GLX Gears
Please Log in to join the conversation.
8 years 4 months ago #112080
by tecno
and this is from last july and have been working OK with 2.7.12
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --
Attachment not found
and this is from last july and have been working OK with 2.7.12
Attachment not found
Please Log in to join the conversation.
8 years 4 months ago #112082
by PCW
Replied by PCW on topic Upgraded to 2.7.13 -- W T F --
Seems similar but the OS version is different
My guess is this is either OS version related or that you have had some hardware failure coincident with the linuxCNC version change
My guess is this is either OS version related or that you have had some hardware failure coincident with the linuxCNC version change
Please Log in to join the conversation.
8 years 4 months ago #112083
by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --
OK, seems to a bit bad to try to 'go back'.
Is this a good choice for a new PC
Gigabyte Brix Mini-PC GB-BXBT-2807
I suppose 2G is not enough memory?
Is this a good choice for a new PC
Gigabyte Brix Mini-PC GB-BXBT-2807
I suppose 2G is not enough memory?
Please Log in to join the conversation.
- ozzyrob
- New Member
-
Less
More
- Thank you received: 0
8 years 4 months ago #112099
by ozzyrob
Replied by ozzyrob on topic Upgraded to 2.7.13 -- W T F --
Just thinking out load, would removing the 2.7.13 version via dpkg and installing the 2.7.12 version and booting with the 4.9.0-3 kernel be worth a try ?
Would it still be possible to checkout 2.7.12 via git ? And trying a run in place
I'm not totally up on git.
Would it still be possible to checkout 2.7.12 via git ? And trying a run in place
I'm not totally up on git.
Please Log in to join the conversation.
8 years 4 months ago #112101
by andypugh
You can do that in the Synaptic Package Mangler.
Replied by andypugh on topic Upgraded to 2.7.13 -- W T F --
ozzyrob wrote: Just thinking out load, would removing the 2.7.13 version via dpkg and installing the 2.7.12 version and booting with the 4.9.0-3 kernel be worth a try ?.
You can do that in the Synaptic Package Mangler.
Attachment not found
Please Log in to join the conversation.
- ozzyrob
- New Member
-
Less
More
- Thank you received: 0
8 years 4 months ago #112102
by ozzyrob
Replied by ozzyrob on topic Upgraded to 2.7.13 -- W T F --
Thanks Andy I'm not totally up to speed with all things Debian.....been a longtime Slackware user.
Would it be worth tecno trying ?
Ok after a bit of delving I was able to work out how to use git to get the 2.7.12 checked out. Got rip to build and simulate and then built the required debs as well. I was just wondering if the uspace packages thru synaptic are tied to a certain kernel version..maybe not or they might "fall apart" with the updated packages.
Like I said the "Debian Way" is kinda new to this fossil.
Would it be worth tecno trying ?
Ok after a bit of delving I was able to work out how to use git to get the 2.7.12 checked out. Got rip to build and simulate and then built the required debs as well. I was just wondering if the uspace packages thru synaptic are tied to a certain kernel version..maybe not or they might "fall apart" with the updated packages.
Like I said the "Debian Way" is kinda new to this fossil.
Please Log in to join the conversation.
Time to create page: 0.107 seconds
