Upgraded to 2.7.13 -- W T F --

  • ozzyrob
  • New Member
  • New Member
More
8 years 4 months ago #111947 by ozzyrob
Replied by ozzyrob on topic Upgraded to 2.7.13 -- W T F --
Sorry this may be not a lot of help.....but mate you have to stop inviting us Murphy's over :laugh: We're nothing but trouble ;)





Yeah I'm "one of those #!%$# Murphys" :laugh:

Please Log in to join the conversation.

More
8 years 4 months ago #111951 by andypugh
Replied by andypugh on topic Upgraded to 2.7.13 -- W T F --
Can you show us the output of:
cat /etc/apt/sources.list.d/linuxcnc.list

Please Log in to join the conversation.

More
8 years 4 months ago #111967 by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --

PCW wrote: What does linuxcnc print when you start it?
(the first few lines)


Attachment not found

Please Log in to join the conversation.

More
8 years 4 months ago #111970 by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --

andypugh wrote: Can you show us the output of:
cat /etc/apt/sources.list.d/linuxcnc.list


Attachment not found




This output starting my backup CNC3000.ini and goes to error state

Attachment not found



This happens after pressing F2 and grabbing the MPG to move Z

Attachment not found




Now I get nowhere as after F2 it always goes to error.

Please Log in to join the conversation.

More
8 years 4 months ago #111974 by andypugh
Replied by andypugh on topic Upgraded to 2.7.13 -- W T F --
Are you sure you want to be running the config in the backup folder and not the main config?
I suspect that the relative path from the backup INI is not finding the lathemacro files.

But I am not sure what the 7i76 error means.

Please Log in to join the conversation.

More
8 years 4 months ago #111975 by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --
No backup is a backup, just showing what is going on.

I have done no changes to my setup from 12 to 13 other that adding Touch screen on 12 then upgraded to 13.

Please Log in to join the conversation.

More
8 years 4 months ago #111976 by andypugh
Replied by andypugh on topic Upgraded to 2.7.13 -- W T F --
I a, just going by
Code:
Embeded tab command "halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -u lathehandler.py -x 44040621 lathemacro.ui" exited with error: 1 Shutting down and cleaning up LinuxCNC... ... (gladevcp:1675): libglade-WARNING **: could not find glade file 'lathemacro.ui' **** GLADE VCP ERROR: With xml file: lathemacro.ui : could not create GladeXML object

Why are you running the backup config and not the main config?

Please Log in to join the conversation.

More
8 years 4 months ago #111978 by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --
Just to clarify, I get the same error in main as in backup = I was worried about something going on with the main to be corrupted.

So what you say is that my main folder has been FU as regards Lathemacro files?

Please Log in to join the conversation.

More
8 years 4 months ago #111980 by andypugh
Replied by andypugh on topic Upgraded to 2.7.13 -- W T F --
No, I am saying that the backup config does not seem to be able to find the lathemacro files.

(Seeing the output of starting the main config might be useful)

Please Log in to join the conversation.

More
8 years 4 months ago #111981 by tecno
Replied by tecno on topic Upgraded to 2.7.13 -- W T F --
forum.linuxcnc.org/9-installing-linuxcnc...-t-f?start=10#111967

Please Log in to join the conversation.

Time to create page: 0.395 seconds
Powered by Kunena Forum