Buildbot repositories down?

just got my new 7i96 (thanks JT!) and was setting up a dummy system to familiarize myself with it, and it seems that the 2.8 and 2.9 repos are down. started with no release file errors, so used trusted=yes, and now keep getting 403 errors. for now i am going to build from source, but was there a url change or are the servers down or being reconfigured by chance?

No
Yes, seems to be an issue, no idea when it will be resolved.
No

so if im reading your answer right, i take it as no url change, yes servers down, and no reconfig. so basically, make a sandwich, relax, and check back later...

just wanted to make sure it wasnt a configuration issue on my end

Yea i did post on another thread that the servers are not down, but the access to them is limited.
Sandwich is a good idea right about now. Just as soon as i finish sipping my double choca mocha.

double choca mocha. when some chocolate is just not enough. now thats a man who knows how to wait in style

oddwick wrote: so if im reading your answer right, i take it as no url change, yes servers down, and no reconfig. so basically, make a sandwich, relax, and check back later...

just wanted to make sure it wasnt a configuration issue on my end

Yep

tommylight wrote: Yea i did post on another thread that the servers are not down, but the access to them is limited.
Sandwich is a good idea right about now. Just as soon as i finish sipping my double choca mocha.

Oh great. Have been trying since 9 am this morning to setup a new machine

Hope things will start working soon, is there anything we can do?

ikkuh wrote:
Hope things will start working soon, is there anything we can do?

Yes, sip some more coffee !

ikkuh wrote: Oh great. Have been trying since 9 am this morning to setup a new machine

Hope things will start working soon, is there anything we can do?

You can set up a new machine from the released repositories. www,linuxcnc.org/dists is still working

What LinuxCNC version, Linux distribution and realtime kernel were you wanting to use?

andypugh wrote:

ikkuh wrote: Oh great. Have been trying since 9 am this morning to setup a new machine

Hope things will start working soon, is there anything we can do?

You can set up a new machine from the released repositories. www,linuxcnc.org/dists is still working

I had already downloaded an Debian stretch 2.7 iso and installing that works great.

andypugh wrote: What LinuxCNC version, Linux distribution and realtime kernel were you wanting to use?

Well, I just bought a new 23" 1920x1080 touchscreen monitor especially to experiment with probe-basic. Probe-basic needs at least 2.8 so I kinda wasted a day here.
Installing on a spare machine, my 7i96 needs some tweaked settings too, also needs 2.8.
And my cnc machine is a gantry style machine, with two Y axis steppers. You guessed, needs 2.8 at least.

Hopefully everything starts working soon again. I never drank so much coffee in a day,