Buildbot repositories down?

Henk
Offline
Platinum Member

6 years 5 months ago #166318 by Henk

Replied by Henk on topic Buildbot repositories down?

installation successful, sorry to bother you guys with my incompetence!

henk

Please Log in to join the conversation.

ikkuh
Offline
Elite Member

6 years 5 months ago #166395 by ikkuh

Replied by ikkuh on topic Buildbot repositories down?

[quote="Henk" post=166306
i also ran apt-get update and apt-get upgrade
[/quote]

Did you do the apt dist-upgrade?

Please Log in to join the conversation.

Henk
Offline
Platinum Member

6 years 5 months ago #166413 by Henk

Replied by Henk on topic Buildbot repositories down?

Yes. I did. But I cannot recall in which order. Got it working now. Thanks

Please Log in to join the conversation.

Vescovo
Offline
New Member

5 years 11 months ago #189592 by Vescovo

Replied by Vescovo on topic Buildbot repositories down?

Hello,
Synaptic Package Manger complains about there is no public key. The key had been put on the keyring already.
In addition the following was issued. The download appeared to work ok.

Code:

#/etc/apt/sources.list
# deb cdrom:[Debian GNU/Linux 9.8.0 _Stretch_ - Official i386 xfce-CD Binary-1 20190216-12:51]/ stretch main 
# deb cdrom:[Debian GNU/Linux 9.8.0 _Stretch_ - Official i386 xfce-CD Binary-1 20190216-12:51]/ stretch main 

deb http://deb.debian.org/debian/ stretch main contrib non-free 
deb-src http://deb.debian.org/debian/ stretch main contrib non-free 

deb http://security.debian.org/debian-security/ stretch/updates main 
deb-src http://security.debian.org/debian-security/ stretch/updates main 

# stretch-updates, previously known as 'volatile'
deb http://deb.debian.org/debian/ stretch-updates main 
deb-src http://deb.debian.org/debian/ stretch-updates main 

deb http://buildbot.linuxcnc.org/ stretch 2.8-rtpreempt  
deb-src http://buildbot.linuxcnc.org/ stretch 2.8-rtpreempt 

Code:

# Key previously placed on keyring
root@debian-9:~# gpg --keyserver hkp://keys.gnupg.net --recv-keys EF1B07FEE0EE663E
gpg: key EF1B07FEE0EE663E: "LinuxCNC Buildbot <nomail@linuxcnc.org>" not changed
gpg: Total number processed: 1
gpg:              unchanged: 1
root@debian-9:~# 

root@debian-9:~# apt-get update
Get:1 http://security.debian.org/debian-security stretch/updates InRelease [53.0 kB]
Ign:2 http://deb.debian.org/debian stretch InRelease                                       
Hit:3 http://deb.debian.org/debian stretch-updates InRelease                               
Hit:4 http://deb.debian.org/debian stretch Release                         
Get:5 http://buildbot.linuxcnc.org stretch InRelease [28.0 kB]     
Get:6 http://security.debian.org/debian-security stretch/updates/main Sources [277 kB]
Ign:5 http://buildbot.linuxcnc.org stretch InRelease  
Fetched 358 kB in 3s (116 kB/s)
Reading package lists... Done
W: GPG error: http://buildbot.linuxcnc.org stretch InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY EF1B07FEE0EE663E
W: The repository 'http://buildbot.linuxcnc.org stretch InRelease' is not signed.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
N: See apt-secure(8) manpage for repository creation and user configuration details.

#
root@debian-9:~# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

#
root@debian-9:~# uname -a
Linux debian-9 4.9.0-14-rt-686-pae #1 SMP PREEMPT RT Debian 4.9.240-2 (2020-10-30) i686 GNU/Linux
root@debian-9:~# 

Please Log in to join the conversation.

tommylight
Offline
Administrator

5 years 11 months ago #189593 by tommylight

Replied by tommylight on topic Buildbot repositories down?

Works here on 3 PC's.

Please Log in to join the conversation.

Vescovo
Offline
New Member

5 years 11 months ago #189603 by Vescovo

Replied by Vescovo on topic Buildbot repositories down?

Thanks tommylight, I will rebuild from scratch.
The installation from CD has some issues. This is the CD
Debian GNU/Linux 9.8.0 "Stretch" - Official i386 xfce-CD Binary-1 20190216-12:51

1) After log-in as userName and setting userName as a member of sudo the instruction sudo was not found.
2) Log-in as root with rootPW if set. I always set it!

Code:

su root
rootPW
adduser userName sudo
# Install the sudo executable
apt install sudo
su userName
# Now sudo works but breaks Thunar's ability to view exfat USB drives

# Correct the issue with exfat USB drives
sudo apt-get install exfat-fuse exfat-utils

# Install key for buildbot
sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key EF1B07FEE0EE663E

# Add the following to for the Synaptic Package Manager
echo deb http://buildbot.linux.org/ stretch 2.8-rtpreempt >>/etc/apt/sources.list  
echo deb-src http://buildbot.linux.org/ stretch 2.8-rtpreempt >>/etc/apt/sources.list
# You should now be able to download the 2.8 version of LinuxCNC without errors

Very nice work you guys!

Please Log in to join the conversation.

tommylight
Offline
Administrator

5 years 11 months ago #189604 by tommylight

Replied by tommylight on topic Buildbot repositories down?

Should not be required, just do and update again.
sudo apt-get update

Please Log in to join the conversation.

Vescovo
Offline
New Member

5 years 11 months ago #189624 by Vescovo

Replied by Vescovo on topic Buildbot repositories down?

But sudo was not working so "sudo apt-get update" didn't work? What did I miss?

Please Log in to join the conversation.

tommylight
Offline
Administrator

5 years 11 months ago #189628 by tommylight

Replied by tommylight on topic Buildbot repositories down?

OoooK,
If installing Debian, if it asks for a ROOT password = do not enter anything, press next.

Please Log in to join the conversation.

Time to create page: 0.115 seconds