Linux Mint 19.2.0 s linuxcnc 2.8 MESA 5i20 + smart serial

More
6 years 5 months ago #169511 by 00alkskodi00
Linux Mint 19.2.0 s linuxcnc 2.8 MESA 5i20 + smart serial was created by 00alkskodi00
zdravim

can anybody say where is my problem?

my old system 2.6.13 kernel RTAI

now installed iso from: forum.linuxcnc.org/9-installing-linuxcnc...aver-mint-iso#165631

+ copied firmware from this page: www.talla83.de/linuxcncmesa.html , number: #17 LinuxCNC & Mesa 5i20 + 7i33 + 7i37 + 7i44 + 7i73 ( Remote Serial Daughter Cards)
firmware name:SVSS4_8.BIT a XML

mesa cant comunicate with this system...

Please Log in to join the conversation.

More
6 years 5 months ago #169512 by tommylight
Replied by tommylight on topic Linux Mint 19.2.0 s linuxcnc 2.8 MESA 5i20 + smart serial
Ahoj, jak se mate?
Can you post the error messages, please?

Please Log in to join the conversation.

More
6 years 4 months ago #169521 by 00alkskodi00
Replied by 00alkskodi00 on topic Linux Mint 19.2.0 s linuxcnc 2.8 MESA 5i20 + smart serial
Ahoj, mám sa fajn :D

no errors no moving :D

Please Log in to join the conversation.

More
6 years 4 months ago #169523 by tommylight
Replied by tommylight on topic Linux Mint 19.2.0 s linuxcnc 2.8 MESA 5i20 + smart serial
Tesi me.
Start Linuxcnc from the terminal and see if there are any errors.

Please Log in to join the conversation.

Time to create page: 0.074 seconds
Powered by Kunena Forum