http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file

More
6 years 3 months ago #175396 by ikkuh
http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file was created by ikkuh
Err:11 buildbot.linuxcnc.org stretch Release
403 Forbidden
Reading package lists... Done
E: The repository ' buildbot.linuxcnc.org stretch Release' does no longer have a Release file.


ikkuh@LinuxCNC-MESA:~$ cat /etc/debian_version
Code:
9.13

/etc/apt/sources.list.d/linuxcnc.list
Code:
deb http://buildbot.linuxcnc.org/ stretch master-rtpreempt deb-src http://buildbot.linuxcnc.org/ stretch master-rtpreemp

Please Log in to join the conversation.

More
6 years 3 months ago #175400 by tommylight
Replied by tommylight on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
Something has gone south, here is what i get:
Code:
E: Failed to fetch http://buildbot.linuxcnc.org/dists/stretch/InRelease 403 Forbidden [IP: 71.218.153.245 80] E: The repository 'http://buildbot.linuxcnc.org stretch InRelease' is no longer signed. N: Updating from such a repository can't be done securely, and is therefore disabled by default.

Please Log in to join the conversation.

More
6 years 3 months ago #175513 by ikkuh
Replied by ikkuh on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
Problem still persists here. No info on buildbot.linuxcnc.org either.
There were some problems in the past (disk full if I recall correctly).

There are some differences between the two error messages though.
Mine speaks of :
Code:
E: The repository 'http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file.
Yours is more specific:
Code:
E: The repository 'http://buildbot.linuxcnc.org stretch InRelease' is no longer signed.

Please Log in to join the conversation.

More
6 years 3 months ago #175534 by tommylight
Replied by tommylight on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
Yup, still not working.
Had the same issues when i was doing the "quick and easy" installs for Linux Mint and Debian, whenever i would forget to add ' to the apt-add line, so that makes me thing something has changed on the server or in the naming of things there.

Please Log in to join the conversation.

More
6 years 3 months ago #175560 by ki4swy
Replied by ki4swy on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
buildbot is down ( 503 Unavailable )... and git is giving me "fatal: the remote end hung up unexpectedly" ..

Trying to upgrade to 2.8 to support joints ... UGG..

Please Log in to join the conversation.

More
6 years 3 months ago #175562 by tommylight
Replied by tommylight on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
Error 503 on both buildbots.
That is a server side issue.

Please Log in to join the conversation.

More
6 years 3 months ago #175568 by ikkuh
Replied by ikkuh on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
@andypugh Do you have any idea?

Please Log in to join the conversation.

More
6 years 3 months ago #175643 by denhen89
Replied by denhen89 on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
I deleted libmodbus, because i trying to get my VF-S11 Toshiba VFD to work over modbus. Unfortunately that deleted also somehow Linuxcnc.
Now i cannot install 2.9 because the builbot server is down. That suc...
Is there no other server available

Please Log in to join the conversation.

More
6 years 3 months ago #175645 by tommylight
Replied by tommylight on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
Now it's 403, permission denied !

Please Log in to join the conversation.

More
6 years 3 months ago #175650 by denhen89
Replied by denhen89 on topic http://buildbot.linuxcnc.org stretch Release' does no longer have a Release file
i can access the site, looks normal, but i cannot update linuxcnc from 2.7 to 2.9.

..does not have a release file...

Please Log in to join the conversation.

Time to create page: 0.235 seconds
Powered by Kunena Forum