Mint 19.3 Linuxcnc Odroid H2+

More
6 years 4 weeks ago #184546 by htdave
Replied by htdave on topic Mint 19.3 Linuxcnc Odroid H2+
I am trying to install linuxcnc on my new Odroid H2+.

I have downloaded the iso from

cnc.beaglebrainz.net/cdimage/cnc-19.3.0-...lus-uspace-64bit.iso

However, when I try to install, I get the attached error.

Any ideas what is causing it?

Thanks

Attachment not found

Please Log in to join the conversation.

  • BeagleBrainz
  • Topic Author
  • New Member
  • New Member
More
6 years 4 weeks ago #184547 by BeagleBrainz
Replied by BeagleBrainz on topic Mint 19.3 Linuxcnc Odroid H2+
Can you reboot and check this first:
Code:
mount | grep efi
Code:
lsmod
Then check that you have a network connection.

Please Log in to join the conversation.

More
6 years 4 weeks ago #184549 by htdave
Replied by htdave on topic Mint 19.3 Linuxcnc Odroid H2+

Can you reboot and check this first:

mount | grep efi


Then check that you have a network connection.


Sorry, I'm new to linux, I'm going to need a bit more explanation.

I didn't have a network connection. Is a network connection required for install?

Thanks

Please Log in to join the conversation.

  • BeagleBrainz
  • Topic Author
  • New Member
  • New Member
More
6 years 4 weeks ago #184552 by BeagleBrainz
Replied by BeagleBrainz on topic Mint 19.3 Linuxcnc Odroid H2+
Yep.
I just booted from the same image and on my end everything is fine.
Once you connect to a network and have an internet connection the install will go ok. Best option is a network cable.

This has nothing to do with me at my end, but is just part of the original Mint installer.

Please Log in to join the conversation.

More
6 years 4 weeks ago #184553 by htdave
Replied by htdave on topic Mint 19.3 Linuxcnc Odroid H2+
Thanks

I'll hook up the Ethernet and try again

Please Log in to join the conversation.

More
6 years 3 weeks ago #184721 by wiremonkey
Replied by wiremonkey on topic Mint 19.3 Linuxcnc Odroid H2+
Hey, just fired up my Odroid H2+ with 16GB RAM, and your LinuxCNC iso. Running great! Quick question, can I do normal Mint upgrades/updates without fear of breaking things?
For example, it wants me to upgrade to Linux Mint Ulyana 20...
Cheers!

Please Log in to join the conversation.

  • BeagleBrainz
  • Topic Author
  • New Member
  • New Member
More
6 years 3 weeks ago #184731 by BeagleBrainz
Replied by BeagleBrainz on topic Mint 19.3 Linuxcnc Odroid H2+
Normal updates are ok.
Upgrading is untested and personally I wouldn’t recommend it. You may lose the ability to update Linuxcnc as I have not created a Mint 20 repo.
Do not update/upgrade the kernel. You will lose networking.

Hey mode could we have these last 2 posts moved to the Odroid thread ?

Please Log in to join the conversation.

More
6 years 3 weeks ago #184745 by tommylight
Replied by tommylight on topic Mint 19.3 Linuxcnc Odroid H2+
Last two posts moved as per request.

Please Log in to join the conversation.

  • BeagleBrainz
  • Topic Author
  • New Member
  • New Member
More
6 years 3 weeks ago #184754 by BeagleBrainz
Replied by BeagleBrainz on topic Mint 19.3 Linuxcnc Odroid H2+
Cheers tommy

Please Log in to join the conversation.

More
6 years 3 weeks ago #184852 by wiremonkey
Replied by wiremonkey on topic Mint 19.3 Linuxcnc Odroid H2+
Ah OK,
I'll reinstall. Good thing I didn't get too far with my setup. Time to build a controller box... Just digging into din rails and terminal blocks. I've never used them before, but it really seems like the way to go!
Cheers!

Please Log in to join the conversation.

Time to create page: 0.065 seconds
Powered by Kunena Forum